Search results

Push the joystick far right past the detent to get it rotated to right. This is past were normal bucket operation is and if the detent might be somewhat stuck requiring additional force to do so the first time. It may also seem awkward to push it this far right. (This assumes your loader valve...

It might be covered under the emissions warranty if within time period. Example document: DOCUMENT Page 11 and 12 give high level parts coverage.

You could look at the manufactures tire specs and compare the overall diameter and effective or loaded radius for each type. This will give you a good idea the difference between tire types. Simple search will uncover manufactures technical information.

I had notified them (Kubota) over the weekend of the issue. As of two minutes ago received and email they are aware of the situation and working on it.

Look up the technical information for both tires to see what the manufactures recommend with respect to rim width.

Here's the other post about it. Illustrated Parts

Yes, others are having the same problem. I believe there is another link asking the same.

Search for 8 point socket found this. 7mm 8-pt socket I’m certain other brands are out there.

Here's what is published in the WHOLEGOODS PRICE LIST EFFECTIVE AUGUST 17, 2016 from Kubota along with pricing. Looks like there are 3 options from the factory to choose from. TURF ALR8708 F-TIRE 29x12.50-15 R3 Titan Turf 83 lbs $ 354.00 AMR8979 R-TIRE 21.5L-16.1 R3 Firestone Turf&Fld 245...

Out of curiosity, looked up the part at Messick's and it is $187.28, which is crazy to replace a washer pump motor. What I find interesting is that they have 15 in stock. That seems like a high quantity to have in stock unless their are a lot of pump failures. The Tank assembly is used in 67...

Do a voltage drop test on the glow plug circuit. This is different than just measuring voltage and will pinpoint where the voltage loss is taking place. there are plenty of videos showing how to perform.

Do a voltage drop test and you’ll uncover where the approximate 2 volt loss in the circuit is taking place. I believe there are different style glow plugs that require different on time. Many older ones take a minute or so while the newer ones are quick heating. The ones in my grand L 30’s and...

The down side to this type of owner self fix is there is no feedback to the OEM or cost of poor quality to get Corp eyes on it. bottom line is they don’t know they’re having an issue that needs resolved. it’s still hard to believe they don’t use constant force clamps. There’s a reason why...

x2 on the compression test suggested above. If low, perhaps run a leakdown test to assess if valve or rings.

GP's are typically tested by measuring the individual GP resistance to ground. Not certain of your particular GP, but most are in the 0.9 +/- 0.2 range. If the manifold has to be removed, good or bad I'd change all three given they can be purchased relatively cheaply. Your local NAPA store may...

The front tire size seems to be suspect (850-15).

illustrated parts diagrams from Kubota's own website... Just click the legal crap and model info. ILLUSTRATED PARTS Good luck.

Someone suggested to look at the internal parts between the two models, so out of curiosity did just that. Comparing your experience with anything but the two models above adds zero value to the question the OP asked. Block: Same Pistons: Same Rings: Same Crankshaft: Same Head: Same Camshaft...

The OP should state all the information about the tow vehicle if they want an answer that stays within their legal or registered requirements. Simply stating tow rating is insufficient. Additionally some jurisdictions have different tie-down requirements (type, number, etc) than what is shown...

If coolant temperatures are not coming up to temperature wouldn't the thermostat be allowing coolant flow prior to when it should? I've never had an engine not come up to temperature if the thermostat is functioning correctly (assuming rpms above idle). Only time they didn't is when the...