Search results

Napa Auto Parts ---- I buy Napa Gold filters except for the HST filter.

I don't think you'll find one unless you're lucky enough to find an owner that's scanned one to pdf. Only sources that I know of are E-bay or a dealer.

Here's a second recommendation for Uship --- I've shipped a tractor, tires and a couple of other smaller items via Uship with great results at great prices.

Try E-Bay --- search for Kubota D650 and see what pops up -- you may get lucky. They seem to be selling in the mid $100 range.

I installed mine in the upper radiatior hose. I bought a fitting into which I could install the temp sensor for the mechanical gauge then split the upper hose so I could install the fitting with simple hose clamps. Works like a champ --- it's a tight fit so be careful when you buy or fabricate...

Click on the "Articles" tab in the header above --- There's an article on bleeding the fuel system -- probably what you're looking for --------

Prettier than my tractor ------------ I like it!!!!!!

My experience --- they tend to hold as set unless you pull the head for some reason or do something else to affect the valve train geometry. Just my experience -----

Ditto -- I love my mechanical gauges.

Sounds right to me. The "gear case side" would be the end that your fan/water pump is on. On my B20, that's the front of the tractor. You don't need to remove the glow plugs -- as you said, just makes it easier to turn by hand. I turn mine with the front crank pulley. I doubt that your valves...

If you had dirt after the fuel filter, I think it's likely that the injectors are plugged with dirt also. I would either replace them or have them serviced.

Lots of examples of #1 as the problem.

They're all over the place --- check E-Bay or Tractor Supply or Northern Tool.

The cylinder bores are different -- D750 is 68mm and a D950 is 75mm. Don't think it would work.

Napa Gold here for all but the HST filter. I stick with Kubota for the HST filter cause I haven't yet found a Napa or Wix that quotes the required micron level for the HST filter.

Rain water??

Or check out E-Bay. Lots of seats --- maybe one will work. Or www.northerntool.com

I would have the radiator rodded out first ---- any idea what temperature it's running at??

Can't say --- but, bought mine at www.messicks.com.

I think they're all available from your dealer. Probably best to use a parts manual to get the individual part numbers --- once you have those, just place your order.