Search results

I see -------- Thanks.

I'll bite --- why do you need a 46mm socket????? Might want to look for 1 13/16" socket as a good match.

Here's an "oil pressure" thread that may be of some help: http://www.orangetractortalks.com/forums/showthread.php?t=417

Might be either one ---- do you have a gauge the you could use in place of the "idiot light" fitting? That would be the first thing I would do to see if you actually have pressure at that point.

That loop gives you a great spot to check your pressure --- I would check it out and see what you have there for pressure.

I'll suggest that you take a look at the QD's you've installed there in your loop. May just be that one of them is no longer seated well enough to allow the flow that you need from your pump to your TPH. Then again, may not have anything to do with the problem, but those QD's can become very...

Here's what I get from the engine manual. At "rated speed" min oil pressure should be 28 psi and max should be 64 psi. At idle minimum should be 10 psi. Oil pressure light activates at 7.4 psi. I see only one oil pump option --- it's a "rotor inside of a rotor". I see no ability to adjust oil...

I have an engine manual at home --- let me look tonight and I'll see what I can dig out for you. I don't think you can adjust the oil pressure.

If you'll go to www.tractorsmart.com you can get a free download of the parts manual. Once you're at the Homepage click on the "Manuals" link -------- follow the prompts from there.

I can't imagine any other possible conclusion.

I assume that it worked before you added oil? Where is it stuck --- all the way up or all the way down or in between?? Can you lift the arms by hand?? I assume you have a "rate of movement" valve under the seat. That's not completely close is it??