Search results

Does what "run" with the batt disconnected? tractor? with a mechanical diesel such as our older little diesels no elect is required for operation. after started, all they need is fuel and air. Since they are a compression fire design they require no "spark" because they provide their own heat...

How did you hear or notice the "slight knock" over the normal sound of a small diesel engine?

Just remember when trying to find implements to use with your tractor look for the cat. (category) size. which is your attachment or pin size for your lift arms. with that said, not everything in each category will work with every tractor. Good luck finding a loader, they're not easiest to...

Hi, there is currently another discussion about the same thing going on right now in the "operating" section. You might get some answers there. If not, Let us know how we can help you find a solution. I'm sure we can come up with some other ideas for you.

Lots of opinions out there. do put some serious thought to it. If you do use WVO it needs to be impeccably clean. many times used oil also needs to be warmed as being used. Do do your reading beforehand. I have used K-1 before mixed with diesel but it is a distillate. Good Luck but please let...

Eric its "Electro magnetic pulse" and the other is basically "when the crap hits the fan" so to speak.

If your in the habit of running into immovable objects it may not last long. Otherwise with normal use and care it shouldn't be much of an issue.

Hard to beat that!!

I've got a 4 ft disc that is labeled Kubota. Great shape but I havent used this year. Also have a single bottom plow with coulter and guide wheel. both cat 1. Both used with a B600dt and a B7100dt Asking $225 each picked up here in west ky. Pic's HERE.

Good looking tractor. Congrats!!!!!

Well you could always follow some ideas from the Delorean thread!

Now thats different, slowly dimming. I'm sorry I cant say for sure because I don't have a schematic for your tractor. It most certainly is in the control circuit, i.e. switch or relay if so equipped, or the grounding of the bulbs themselves. Something is increasing in resistance until out. To...

Eric is probably right on track. Its really hard to get oil out of the clutch disc. When you have one apart is the time you should replace everything. That way.... Oh, don't forget to really degrease the tunnel good and buff up that shaft too. You know, just to make sure everything moves as it...

Look for a Travel lock as was mentioned. Just don't be putting to much strain (hyd pressure) against itself. You don't want to tweak anything!

Now you've gone and done it! You worked on it and fixed it. Now your gonna want to do more! You've got the "orange disease." No turning back now, thats what happened to all of us! haha Glad it's going, we're happy your here. Stick around, before you know it you'll be giving someone advice on...

You will find a great article here that SDVic did on the subject of bleeding injector lines, thats if your not familar to the process. Please let us know how it goes!

I hadn't looked at Jeg's yet. I'll throw an eyeball on it. Of course economy shouldn't be forgotten either. I've never priced a mini alt before. The size/weight would be great! I'll have to consider them. Thanks for the heads up!!!

Hello and Glad you found us! Now, as far as your comments, Yes it would be fantastic if folks would come back for a few seconds and type a few letters down just to let us know, and others too, what worked and what didn't. Very few ever do, they get the info they need and thats all we hear...

Hello, Your tractor has 17 PTO Hp. And really the MAX tiller size would be a 48". In my experience it, 48", would use every one of those ponies in heavier soils like in the mid-south and south with it's higher clay content. Your area my be better and thus, not so hard on the tractor. If I was to...

Sorry I guess I missed this first time around. I actually put a B8200 drive on my B7100 but, I didnt have that cast water pipe to deal with. I did have to pull the one rad. hold down bolt on this side to twist it around some what to gain clearance. Looking at the pic, is it possible to do the...