Search results

I think you should probably junk your "new" tractor! I mean look at that seat; It's rurnt! Comments like that is what a brewskie (or too) will do for/two you! Also-Look at my profile, triple digit posts as of tonight! Yea, I'm a cheap date.

LOOK! 99 posts! do I win a prize tonight if I post 1 more time?! if so, where do I redeem it? Actually, posting this IS 1 MORE POST! YEAY!

Welcome to the forum KShelton! You will find friendly, knowledgeable help here. I can't help with your issue but I can comment/relate my personal experiences. As often as not, depending on the set-up, I have had in-line fuel filters work perfectly normally for YEARS half full of fuel; or half...

I'm glad this happened to you!! No,, wait, that didn't come out right. What I mean to say is that the first and only time my tach spun 180° in the-blink-of-an-I, and broke the needle off near the base, is when I had the instrument panel off for the 1st time then re-assembled it. I very...

Re: All Kubota keys are the same? You expect me to believe that!? Each tire has at most 30 Lbs in them. DO THE MATH! That's only 120 Lbs total. Now, what really amazed me was when the lil 7 yr old girl at the neighbors went to pick up my portable air tank and I told her, "you can't pick that...

When I want to sharpen my bush hog blades I always remove them and put on a fresh/sharp pair. I always break out the 3/4" breaker, ratchet, a big, steel cheater pipe and 1-1/2" socket. That is pretty much the only time the big stuff comes into use. I might consider buying a 1/2" drive, female to...

What's a socket??

Welcome to the forum amassoc! Lot's of good guys/gals here to help you. Stay tuned and someone will advise you. Again welcome.

Duh; I don't know why I ASSUMED it was on the bottom of the fel. As a matter of fact, I can't even fathom that a cross member would be necessary to transfer partial load across the frame!

Sorry 'bout that Mister dude. I got all excited because I ASSUMED diagrams would be there, not just harness lay-outs. Oh well, the wsm will Shirley cover that; you think?

Re: All Kubota keys are the same? There you go Mister Mister. Thanks Mister Russell.

Re: All Kubota keys are the same? What is your address again? I probably should pay you a visit just to check and see if MY key will start your tractor! LOL No just kidding. I knew that all lawn mower keys seem to match because when I bought spares at the dealer no questions arose about the...

I guess that seems like a good idea, although you might look at it before unbolting it to see if the cross member might possibly help align and hold the stump in place? Also, the stump piece is small enough that I can't see how it will be easy to hold in place to tack then weld it with the...

Hi SHC and welcome to the forum. I am quite the noob myself but there is plenty of talent here to help you. Clear, thoughtful descriptions are a must if a simple resolution is to be found. When you say power loss, do you have to rev the engine higher to maintain speed when the problem occurs...

Welcome to the forum matR! You have stumbled (?) onto the best possible Kubota equipment site imo. A lot of friendly, helpful talent is here for your use. If you look at peoples info, to the left underneath their name and you see they have like a brazillion posts, then you can trust what they...

WOW! That sure is a beefy looking place for a break. I'm sure you know this already but just in case,,,. Do whatever is necessary to grind off "pointy" material in the break then clamp, press or even drill, tap and bolt the broken part to get it as close to original position as possible...

I'm not quite sure I understand this. Please clarify.

Welcome to the forum SteveB2. You will find this site invaluable as it is well stocked with lots of knowledgeable folks. Have you found the site below yet? Accept the terms after selecting view illustrated parts, enter your exact machine model and then look for electrical and click on the "+" to...

Your PTO may not actually have a problem. How much experience do you have with your machine? My L5450 PTO spins all the time until/unless it has considerable drag on it. It has done so since I bought it, used. Even with the bushhog connected and PTO out it will spin up till the blades sit on the...

Yea, KEEP YOUR SHIRT ON !