Search results

Someone please correct me if I am missing a important technical point, but you should never have a voltage drop/reading from any ground point and the frame. If you are actually checking from starter 'ground' to the farm, err I mean frame, then I think you have found your problem.

Welcome to the forum Studebaker Man! What do you have? 2 or 4 wheel drive? HST? The wiring diagrams are available on-line! Free! https://apps.kubotausa.com/illustrated-parts/ Each machine has variations in wiring, so knowing which machine you have will lead to faulty circuit isolation more...

Welcome to the forum Mht! The L series tractors seem to be very popular; that is what mine is. The WSM, Work Shop Manual, not so easy, cheap or helpful as far as R&R, remove and replace goes. I guess that learning curve is part of the journey. LOL Follow this link then follow the instructions so...

Hello and welcome to the forum! Follow the link below https://apps.kubotausa.com/illustrated-parts/ accept the terms of use, open the parts illustrator, type your model into the search bar, wait for it, here it comes. Now look down the page till you find hood/bonnet and click on the little "+"...

Welcome to the forum Orange4X4! you will find a lot of knowledgeable guys here, and then some not so knowledgeable. LOL For example I had to watch a tube to see what a ratchet rake was. The vid I watched bothered me however, because of the job the dude was doing. The height of some of the dead...

Err,,umm,,, I thought you said you had to get back to work!? :cool: And me, off to the races, in a manner of speaking.

Welcome to the forum bsamot69! The filters on the site often kick new members with less than 5 posts to the curb in an attempt to prevent phishing (sp?) It happened to me. I admire your post! It seems you composed and proofed it before sending as the description is clear and concise. You will...

BUSTED; :cool: again!

Haha very funny, but I can see I had that one coming! LOL You do got me on one thing though; I did not check the price of the linkage or even know what it is called. I didn't think you could get a 4" zip tie and a 1" o-ring from Kubota for $35! Don't get me wrong, I love my orange tractors and...

'Sounds like it may be a bit late if you have already bought new parts, but you could buy a thread chase or die and try cleaning up the old ones?

Welcome to the forum! Boy, have I got good news for you! I had to do this, like ten years ago on my T1560 which has the exact same setup, judging from your video; which by the way was perfect! Your steering/connecting rod has a ball joint on both ends. On the other end of your ball link, the...

Thanks JimL; Yep, makes sense. Do you know what the load induced, nominal voltage drop would be across a typical link if no circuit abnormality exists? Would you expect even a volt?

Hi JH88 and welcome to the forum! I don't know a lot about fusible links but I can tell you one thing and suggest one more thing. If the fusible link is getting hot, that means it is not "burned open". If it was burned open it would not allow current to pass through, and it would not heat up...

I too would like comments on this fine point. I have never tried to do a EXACT measurement to see if cylinder makes a substantial difference. I just assumed that fluid does not go into a cylinder somewhere unless it comes out of same cylinder somewhere else, which is probably dead wrong thereby...

Kingrock, welcome to the forum! You will get a lot of good advice here. How much room do you have to get on the filter? The one BAP hyperlinked is one I have had good luck with, as it will frequently get into tighter spots than other designs. You may still crush the filter before breaking it...

Welcome Springfarm! As NIW stated, that level thing is what assures you are oriented the same every time. I actually go to the trouble of placing a 2 ft level on fender or wherever, and level machine in two directions before checking oil and hydro. If you happen to have a nice concrete slab...

Alleypooper I suggest you read your entire post carefully and try to pretend #1 that you did not compose it and #2 that you are a complete stranger trying to help, but all you are given is the post; as is. I hope you will agree that your description should have been proof-read and clarified...

The end cap may not be available as a stand-alone part. You might have to get creative and find something/anything with a diameter that is large enough but not ridiculous, drill a center hole in it, put rubber seals on it and a wing nut to hold it. Two seals actually; one between the cap and...

While you are ordering books, get a copy of Dean Koontz Ticktock. It is a fun read. :cool:

Is it flashing bright and consistent or is it what in my case I described as having a nervous twitch; like it has tourettes! LOL. I don't know if this will help with your prob, but I recently had a issue with my '93 L5450 and a dashboard alert that was not flashing or consistent. It was my...