Search results

Or try swapping the bad injector to another hole. If the problem follows, its with the injector...:D:D

Depending on how many hrs are on the machine, you might want to consider taking the pump to a rebuilder. I just had one done (cat, not kubota) and it only cost me a hundred a cylinder. My eyes are bad enough that I don't take the chance of losing a part, during a rebuild. You should be able to...

I would recommend you mock it up, out of wood, before welding a stitch. Most Universal fit models have a sliding collar, on the central tube, to make it adjustable, to any tractor on the market. Maybe even better, to take pictures and measurements, at a friendly dealer. Also, 3 point hitch...

Another thing to use in daily practice, is to carry the load low. Especially when on a hill have the front bucket as low as possible, and for that matter it won't hurt to do the same thing with the hoe bucket... Point 2: just how steep is the hill? These...

http://2.bp.blogspot.com/_Q_4mbCuV7QE/SZGub0MXydI/AAAAAAAAE-E/b2qGVzHPWqM/s400/article-0-034B9396000005DC-526_468x608.jpg :D:D

Go to agrisupply's site, and search cultivator, lots to choose from. Then post a picture, and we will chime in on what we have experience with...:D:D

Lucked out. Chain is 60H, and I have 3 master links in the drawer. Got it apart, all I could find was busted chain, bent tensioner bolt, deformed steel by bolt, and a swelling in the gear case, the last 2 will be repaired by BFH. what caused it all was a cat 5 shear bolt, where a soft bolt...

Not my hyd PHD, the op's 3 PH model. I have used both types. I prefer the hyd model, flip a switch, unstick the auger, plus its easier to connect...:D:D

Check anything that parks where the part was... Lots of times, at a factory that assembles anything like a car, atv, tractor, etc., if a washer drops down into the lower regions, the workers just grab another, to keep the line going. I wouldn't worry too much about it. For the record, it...

Tilling with the L-185 and a Befco G50, today, heard a bang, thought I hit something. Lookrd back, drive shaft spinning, but tiller reel wasn't turning. OK, I thought shear bolt, But NOOOOOOOOOOO, snapped drive chain, in the gear drop box. Easy to tell by the dent forcing the drop box cover...

Oh, they were charged, alright...:D:D

One of my brushes with armed responses, happened when I was still in college. Cutting hay one day in the fall, 2 canadian refugees decided to have a shootout with 2 armed Canadian escapees. Road was closed, when I was on the way home, police road block, so I ended up going through a...

A 55 gallon drum, with 3 point connections, set in the concrete, in the drum, would give you about 1100 lbs, almost what you need...:D:D

Till the wear parts on the tip wear out, that is...:D:D

Soak the shaft in Kroil or your favorite penetrating oil. Then chain BH to a big tree. Disconnect the TPH attachment points. Use your tractor, to pull the 2 halves apart. If you have to, remove the remaining part if it is stuck to the tractor, by soaking with penetrating oil, and or, pulling...

It is possible. Just hook a buried root or rock, and the screw action drives the auger down, and the tractor up... :D:D

https://youtu.be/_1fzePmUxVw :D:D

Back in the old days (less traffic on the local rds), we'd take a tricycle tractor, drive the front end onto the truck bed, chain it in place, and take off, sans tailgate... Cops nowadays DO then to take umbrage at that...:D:D

On my Hyd unit, I think its like 60 RPM. They used to make the PTO type out of truck rear ends, so a 4:1 rear should drop 540 down to to 135 RPM, so that's my guess...:D:D

Heard 2 more today: A blonde and a lawyer are seated next to each other on a flight from LA to NY. The lawyer asks if she would like to play a fun game? The blonde, tired, just wants to take a nap, politely declines and rolls over to the window to catch a few winks. The lawyer persists and...