Search results

hope its not too late, I (my buddy who is better at this stuff than I) did them with needle nose pliers, its a cluster you know what in there, but he did it, took about 15-20min.

looking at the tractor you wouldn't believe it, but the capacity is over 600# according to specs, I can verify as well. As far as skidding, I made a temporary dealy once with a tow strap and drawbar on the 3pt and my main problem was keeping the front of the tractor on the ground, even with...

and as far as weights go, I got some Olympic plates for weightlifting and put those on, depending on where your wheels are set, mine are in as far as they can go, I put a 45lb plate on the inside of the wheel, and a 35lb plate on the outside, fits just perfectly in there, held the weight on the...

if you go to you front right tire, just behind it under the engine is a bolt, should be slightly colored head on it, that is where the drain for oil is, take that bolt out, and there is a screen on it, that is kinda sorta the oil filter, cigar shaped. for the hydraulic fluid, look underneath...

remember you need one that rotates counter clockwise unless you have the reverser.....I found one for my b6000 that I believe after some research was meant for a Honda RT 4x4 tractor, you know, those cool 4 wheel steer ones. Someone must have taken the blower and mounted some hardware on it to...

I know its far away, and a tad bit high, but I also know how hard they are to come by.....I have nothing to do with this listing, but ran across it today: http://hartford.craigslist.org/grd/4199133992.html

hey I left you hanging do you still need those measurements for the kufd110?

I know with my b6000, if it's really cold out I pull out the decompression lever, ALL the way out, I also never put the throttle all the way up, I pull the lever until it just taps the throttle, glow plug it for however long, turn the ignition, you will notice it spins really fast, then slam in...

Thanks guys, changed those fluids, everything was right where you said, but didn't bother with the steering fluid, is that something that's changed normally? Thanks

Plan on changing the oil in the front diff. Is it pretty self explanatory? I see a drain plug, I see the fill plug, is there anything else I need to know? Also, what other oils do I need to change while I'm dealing with the front. I have read there are some other things up there that need...

I have a b6000 and the coolant is leaking where the upper radiator hose meets the engine. The clamp is tight, any reason why this is happening?

Ok, I'm not nuts, second post down on this thread: :confused: http://www.orangetractortalks.com/forums/showthread.php?t=11819

Could be totally wrong with my memory, but I thought I read somewhere that there is supposed to be a bit of wobble, is this wrong? I have wobble on my b6000, in fact I just checked the other day to make sure there was a bit of wobble after I read that....

Going along with this thread, what goes into the radiator of a b6000 in the winter time? I am worried about the water freezing when not in use.

Pretty sure there were 2 blade models for the b7100. I know the one you need for a b6000 is KUFD110, which was available for some b7100's. I am also pretty sure that the KUFD110 will not fit your b6200, but I could be wrong on that.....

turns out i had to have both cylinders physically connected to the tractor in order for it to work, the cylinders work in conjunction with eachother. Thanks for the input!

Hi guys, I have a b6000 with factory power angle blade. I just had the cylinders for the blade redone and new hoses done. I brought everything home and hooked everything up except one angle cylinder.....blade lifts and down pressure is there, but the angle cylinders are not working properly...

my machine is far older than yours, but perhaps the same in the sense that my glow plug indicator light in the dash was not lighting up and the tractor was hard to start....i changed the glow plugs and now the light works, and the machine starts right up.....perhaps your glowplugs are shot?

Did you ever get help with this? I can measure things if you still need.....

Selling my b6000. 4x4, runs excellent, can idle down to practically nothing and still run, 3pt hitch, homemade snow plow which works off of 3 pt hitch using a pulley. Have owned the last 3 1/2 years, has been garaged, was told I was the third owner, previous owner garage as well...