Search results

great point, hope to cancel the order as we speak...until I get my mile long barn after i win the lottery i'll just have to be careful when operating

thanks all, those are awesome instructions - 7.5' is quite tall, was hoping for something just above the height of the exhaust.

thanks again, wonder if it doesn't fit if i could just cut it down and have it welded...

awesome thanks for the tips...do you know the height? Or how much higher from the seat it is if your machine is not DT? Worried whether or not it will fit in the shed.

just ordered a rops for my l185dt and i have 2 questions:1 - overall height of tractor with installed rops?? and 2 - easy to install myself?? thanks

Hello all, Possibly adding another orange tractor to my collection tomorrow, so as I am unable to sleep tonight thinking about my possible new addition (you know you've been there) I had a few questions about it - L185DT: 1) does anyone know if it is a "dual clutch?" 2) does anyone know...

congrats on the new tractor.....off topic, I see there's turf tires on her, would love to know the tire sizes of the front and rear if in fact it is a 4x4....would love to put turfs on mine but can't find for sure how to go about doing that without ruining drive components......

nice looking tractor.....if the blade is a 3pt hitch and same category it should, same with auger. CAT 1

thanks again everyone, any real difference between bx1800 and bx2200 other than HP? I assume they both run the same size implements as the difference in HP seems to be negligible. How is taking the deck on and off these, what about the front blade?

thanks for all the advice....we're changing our minds now, he's leaning towards a bx1800 or similar....

I'm the last person to be giving advice on this, however i have run my b6000 out of fuel before. Pretty sure the "plastic cannister" is a secondary fuel filter. What I would do is pull the fuel line off below it, then turn the key to the on (dont try starting it, just turn the key) position...

I appreciate the info on the attaching and un-attaching of the mower deck. Unfortunately the size of his property won't lend to a 3pt mower of any kind. I wonder if you can/should use the 3pt blower with the mower deck still attached?

Hello, Brother in law interested in a tractor for both snow removal and mowing duties, must have 4wd due to driveway incline. The budget puts him in the b7100/7200 area, but we are unsure of the mowing capability of these machines. How do they mow with a belly mower? Is it easy to take...

not sure if this is accurate, but my b6000 would so something very similar until i replaced the starter. Does a bad starter drain the battery? It seemed to be the case with mine. If i left it running it was fine, even if i turned it off and started it pretty quickly there after. But, if i...

should be fairly simple. There should be a bolt with a clevis pin in it. Remove the clevis pin and the bolt, then you will see a bolt and a spring. Loosen the bolt and the rim should slide out or in. Maybe spray some lubricant on the axle to help it slide. Find the new notch you want it to...

yes that is correct and what i have on my b6000-, 6-12 and 7-16

almost positive Kubota made a loader for the b6000....believe it or not i even think there is a backhoe....someone will verify

both loader and hoe appear to be aftermarket....however they both look cool

Do you have any pictures you can send?

Try googling this part #: 10283-11240 I did that a few weeks ago, and ordered a brand new one, about 40$, but i forget where i got it from....i think it was here: http://www.colemanequip.com/parts/KubotaParts/10283-11240/