Search results

No issues. I will occasionally check during a mow, but that is to make sure the grass has not found its way to the shaft and bearing seals. There has been no accumulation of debris. :)

A couple of years ago after mowing one of our fields I noticed Hyd oil pooling beneath my B2620, Oh "you know what". Ok, its a good thing I kinda like tearing stuff apart, as the tallgrass had wrapped itself around both ends of the propeller shaft destroying the bearing seals. Of course the...

Thanks all for the response. :)

I know this is old, but I experience the same thing and it shows over full after re-dipping? I did not see any replies to this and I am hoping somebody might know what's up! Thanks for your interest

If you do drill the holes make sure they get filled, with a bolt, something solid. A filled hole is stronger than not. :)

This is the new anti-high center option when off roading. :)

Thx Not to sure about genius, I usually get told I got to much time on my hands. :giggle: Heres one more you all might get a kick out of, its a converted weight bench for my 3pt logging tools and pallet forks. I did not add it originally as its a little rough.

thx, just gotta be careful what gets outside the box at times! :giggle:

Got all me implements on dolly's now. So much easier to hook up! And put to use some stuff that's been laying around. :giggle:

I put together this log arch from an old cement mixer, and stole the wheels off my wood spliter.

I searched this and came up with this https://northernhydraulics.net/catalog/dust-caps-and-plugs-177-1.html thanks

Great suggestions Mikester , Donystoy I think I'll start looking here!:giggle:

Anybody else find that the rubber OEM hydraulic hose dust caps for the male ends don't stay on very well? I've been searching for metal caps which we used on the jaws of life hoses, but can't seem to find them. Any ideas out there?

Please tell me more about your casters 😊 5" rubber, here are some other pic's, I made the bucket plate bigger because it had a tendency to slip off the back :(

This is what I put together for my B2620.

I have the same thing going on but its the left gloves that pile up. Are you left handed? I am right handed so it is that glove that wears first and gets tossed. Why I keep the left gloves without a right, that's just marrmanu!

I have a wood GB60 5' box blade that I use to 1/2 to 3/4 capacity depending on if I am going up the driveway or just level. Dosen't seem like the Land plane will hold as much material. Thanks for the input.

I pull a woods GB60 5' box blade with the B2620. It will bog, down lose traction when about half full or you hit a decent root, but I not moving mountains either. The L2501 is heavier may pull just fine.

I have 7 + ac here with steep hills full of mole mounds lots of fir, alder and two large hilly meadow areas. I use a 4' brush hog behind my B2620 works just fine, no hill climbing issues, I am sure it would pull a bigger mower of either type. When mowing tall grass be mindful that the grass...

Thanks all for the input, I am gonna go with the 6 footer.