Search results

Is that next mark after the 20 degree Mark a 15 degree mark.or does each Mark go one degree at a time.and engine has upper knock.going to do conpretion test and injector pump timming and everything I can before tearing the engine apart.if it ever stops raining here in Ohio enough to get to it.

The manual says between 17 and 19 degrees.and I seen on specs 18 degrees.is this picture what marks I should be seeing for 18 degree timming?

My tractor is Kubota L2900 with I think has D1503 engine.what size glow plug and fuel injector thread pitch size adapters does it have to have?

It was knocking so I tryed different injectors.it didn't help the knock and smoked.so I put the old injectors back in.engine never did smoke with them.now it does really bad.after putting them back.

It didn't do that with the injectors in it.now blue smoking alot and didn't fix the knocking.only thing I noticed different is motor not pinging.

GrainFarmer.com Farm Store.purchased from eBay and they was sopose to be genuine Kubota injectors that had been remanufactured and tested.

I have an upper engine knock.put injectors in it and still didn't help it.i was thinking maybe a lifter or push rod.

Have a Kubota L2900 tractor.do you have to remove the head to replace what I call lifters

What all wrench sizes needed to remove the injectors on Kubota L2900.

My L2900 recommends a 2-12" plow or 1-16" plow.my tractor has the 420/70-24 rear tires.what all plow moldbord sizes would work for tire size? Do tire widths determine for what size plows for furrows?

When you remove loader from l2900.after unhooking hoses is there a shut off to keep from sending fluids?

On mine only lights that come on is battarie and oil preasure.and one Hazzard light.how many lights should there be and how many bulbs would I need if replacing them.

Anyone have crossreference bulb numbers to replace the factory oem bulbs?need several dash ones and others.

On the fuel injectors do new ones not come with washer and heat shield number3 and 4 ? If not can you use old ones.

Anyone have a copy of operators manual for Kubota LA480 loader?

How wide is the Kubota rims for these? Would a 12.4 tire fit on same rims.

The tractor has piston slap or worn wrist pin.should I pull the pistons and rods and put new ones in it? Or just run it like it is until have to do a complete rebuild on it? Whats your all opinions.runs fairly ok know just has a knock.only has a little blue smoke when you first start it up cold.

Anyone know what this knock is?

Thanks for the information