Search results

Thought I'd share, tighty up manifold and wiring. I also shared with Summit about excess Hydraulic line on BX2380 with pictures. You can't always fix long lines by looping them. In the Bx's case, long but not enough to loop. Quick hitch is out for now.

I learned my lesson years ago also, when glancing a engine manual and miss took inches for pounds and broke an piston oiler on a performance motor I was building, which cost me a week. Thanks for link, it gave me an idea to check AZ auto parts, they have free tool rental. Not doing projects that...

I changed one on the bench before mounting manifold, but thought I'd wait until after mounting system on Ropes. Not sure if it will clear coupler, I'll give it a try. I was thinking just one end. It would all depend how my wire placement goes. Did you ever fine a torque wrench to read 2 ft...

Well I'm on the last f of installing 3rd function on BX2380 with rear remote. Looks like I'm going to tape into the systems optional 3rd function fuse position. Hopefully they already have it wire, I'll just need to trace over to where the factory taps into it for their 3rd function unite. I...

Nice write up. just completed running my BX2380 and making sure no leaks per instruction after mounting rocker switch. I also have narrow ROPES but in my case, I just ran a die over supplied bolt. Thank goodness they attach a PDF file. There was a few other questionable order of operation, but...

Yes, I had the dealer add the factory fluid before taking delivery. Approximate wheel and tire weigh 130 lbs.

Hi all, looking at mounting JD wheel weights BM17972 (50 lbs.) on my BX2380 rears and was wonder if anyone has? The 1025R uses a 12 x 12 wheel also. I'd like to find a fair price on a used set. but everyone trying to retire on wheel weight sales, freight cost doesn't help.

Be thoughtful what you drive over. Ground clearance is not bad with the mower deck removed but the underbelly leaves hoses, filters and cooling fans exposed. Went ahead and ordered bxpanded belly pan already. Now the fun part selling my little 5100.

Thanks everyone for sharing. Well, I take in a BX tomorrow, and Hydro with no whine around the dealer yard. This is about the same (similar) footprint at the B5100 but a lot nimbler and quicker. Have to make sure I don't a project I'm not ready to finish, getting use to it. The B5100DT will move...

Hi looking at doing the hop, skip and jump to getting a more modern and... tractor and leaving my B-5100DT for other task and I've landed on the B series, B2320DT Gear drive that is. It's a couple of grand higher than the BX's listed in areas CL, except for one with 41hrs. on it. The B has 441...

Thanks, I've been an owner around 5 years and previous owner had installed, without checking papers. I do a little solar harvesting for my class C. and that's where I 've read the AGM battery habit's and needs and it just didn't seem needed for just starting and being maintained by tractors...

Hi, well the battery that was in the new to me B5100 a few years a back is showing signs of " I'll start when I want to". Anyway, we all know it takes a Grp. U1 battery with 35 AH. So I've been on the look today and I see company's selling an AGM replacement with a listed 35 AH 70.00 (1 yr...

HD is the closes for 299. and what the rep said no run timer just a flat 24 hour rent. I did see a couple for less 160. but had a run timer at 8 hrs per 24. and had to travel 22 miles Next they have something I can't fab or alter I'll look at unite and verify unlimited run time in 24 hr. point.

Thanks for input, I looked at these a few times over the years before i even owned my tractor. It the same specs as my 12P, except cat. I , PTO. I did see a used Bear Cat Model 73554 for 1500. I did call local Big Box, HD and can rent 25 hp, 6" self-feeding for 299. for 24 hours (a good...

Hi all, have a B5100DT, oh like it says. was wondering what's to small of pto HP to use a PTO chipper / shredder. Mind is rated/about 10hp I currently have and using an earlier Mighty Mac 12p (12" FW with Hammers) 4" controlled by a clutch belt system which is helping control of windblown tree...

Well tires arrived and they look good. Just finished prepping wheels with some rust buster by Rustoleum and a coat of paint/primer. Going to mount tubeless first and save tubes that I purchased for old weather checked turf tires that were mounted by once used tire shop. Wheels look fairly good...

Bart and others, well I finally made a decision on rear turf tires and went with these "BKT LG 306 Turf Lawn & Garden Tire - 27X8.50-15 LRB" after seeing a real photo and reviews

Bart as you can see I also have a B5100 and still have the OE head light lens and backing and time to time went after looking for bulbs (LED) that will fit into the halogen socket (got close one time). It's only a single wire coming for the H-lamp area, which is like a lot of aftermarket fog...

Thanks Bart

Thanks for reply and info. Do all B series have same lug nut spacing?