Search results

Yes it's effective, more stuff to look through when open and using bucket. It takes getting use to but allows you to pick piles and sort. Size wise it's good, allow for good bite.

Hi all joining this thread kind of late, but it just happened when I got a branch 1.5" wedged between movable section and fixed portion of front grill, I was able to back off of it. Which was bent outwards toward loader arm. It now comes into contact with loader foot linkage when rising. I'm...

Finished torquing bolts on my new 41" FH-EFGC Flail mower and then on to cutting and setting up PTO shaft after lifting mower from steel pallet base and leveling. I was going to wait till tomorrow am, I couldn't. I left factory cut height for roller and skids all the way up. Went out and did a...

Look at those eyes, What not me!. I had a Vizsla for a little over 12.5 years. Wooded Redfield was his full name, but answered to Wooden. Touch a shotgun in my house he was ready to go, he just couldn't drive.

Grade 5 x 2.5 is the standard shear bolt, at least for the FH-EFGC, just like you had assumed. You can buy one at a time or in groups, some with relief groves to insure clean shear, some without (hardware store) at a very reasonable price (cheap). Put a manufactures name on packaging and the...

Found my steel expanded metal, a little more than I thought I had, but worked out just right.

Hi everyone, thought I'd show how thing are progressing slowly on carryall. was able to find some almost Kubota gray and had to evited a few squatters in some PVC pipe/ tool holders with Chain saw holder with last of paint thinned out to far, but has a little color ;).As I was doing a walk...

It's made by Precision Manufacturing

Just a quick shot of Small (27") Add-A-Grapple on my BX2380. Wow, yes there will be a learning curve! But will assist in taking care of task around place. A lot easier moving brush pile then log (firewood branches) or a little better arranged.

Finally got around to mounting toolbox to ROPE. Used 5/16th Insert=a-threads in existing holes. Won't open pass 90 if displaying caution triangle. Almost got close to Kubota gray... close enough. Red balls are for Jeep when pulling into shop.

I also had a hard time researching about Maletti mowers, I ran across larger ones. most of the ones I saw on google were 5 foot and larger. I found parts that worked on them. The consumables seem to be going up in price with their popularity. Lifting a under 4-foot mower (manual suggest 42...

Decided to go with one more 2x8 on headboard and now needing to salvage another 2x4. Decision still out on shorting deck length, but with side rails decision is being made

Started assembling my carry all project a couple days ago, using the Yintatech 3 point pallet forks as a building platform. Here I have a 48x48 deck with 22inch high back board,, I may go up another 2x8. I do plan on adding a couple handled tool holders and lets not forget a chain saw Scabbard...

Looking at older 42 inch mower with PTO shaft, What I can tell from poor photo, grass blades need replacing (fairly beat up and bent. Their held in by cotter pins not bolted like I've seen others. rotor appears straight along with rear roller. Seller is asking 900.00, blue fading in color, with...

?, if your referring to me saying takes "5/16 Allen tool". Which is used to hold bolt in place while torquing nut in place with blue lock tight, just because it was there. It's a blank hole that I put the bolts through. Kubota hardware kit for lip install kit (carriage bolts and nylock nuts)...

Thanks, Kubota's bolt on bucket lip is pretty good and the stock edge is fairly durable and hold up. My older B5100DX lip held up well. The only reason I installed was because it fit better on my BX then holding the wall up :)

Back in December 2022 right after I purchased my BX2380 I purchased a six foot bucket cutting edge. My plan was to shorten and drill and counter sink Machine Allen head bolts with serrated locking flange nuts. Well, I finally finished it up after having extra flange nuts after completing wheel...

Decided to keep JD wheel weights, with a little color not bad at all. My choices were orange or a close Kubota gray. used 1/2 ready rod, oops all thread for you younger folks :) Tacked serrated flange nut on one end for inside of wheel and locked down with another flange nut on outside, four...

I've been closed minded or just stubborn on left side mount. Thanks, need to get out a piece of measuring string :). with the hoses in this configuration, there were times that they came in contact with QH while using rake and placing it.