Search results

Thanks Never herd of it befor this post

4 day project

Mine did not stop just kept getting slower & slower to the point were it would not go up a slight grade in any thing but low gear. Hope you find something simple

OK "watts beet juce" Rember Calcium & i use RV Antifreeze in my old furgusons

Had & a HST failure on my L3130 / lots of reresearch three dif. dealers & head Mechanics / ended up putting a used trens. baught on line / If you have checked all of the above feadback items /oil deain & cut filters open if you have bronze that will tell you its in the HST pump or drive

Off my old GMC pick up

Got the 60 inch one was bent straighten it out on a buddies press added two pieces of 6x4 lentil angle I have some 1 inch plate how to make a tooth for East side ( on sum day )

Ya looking closer your sub frame is differant / Nice job on yours

1/4”x4” plate A pice of 1” key stock & some U H M W plastic / Slips right in between the sub frame and boom mount

Nice looks like a moble work shop

Old air compressor tank 20 gallons just added it to the land plain 166 lbs plus tank

Up high out of the way

Stump grinder had to remove the test of red oak from storm damage 54" at the stump 3hrs with a rental grinder took more time to go get it & return it

Did a test at a quarry i was Superintendent at . Two NEW 250HP, 1750 RPM virtical turban pumps Moters. One Moble Red Synthetic other Dryden Oil bulk molly. Pumps Ran 16hrs a day , 6 day a week. After 4 yrs No Difference. Grease at Manufactures Recommended Intervals, Dont over grease & Buy A...

The Harbor freight fit the glow plug on my L3130

i agree 30w & 40w are different base stocks / just stating the first # is what it pours like

The first # is a pore wt the second # lubrication viscosity / IE pores like a 5wt oil but has the lubrication capisity of 40wt at any temp. /And I'm Not trying to be a smart ass .

Fuel pump also & understand this quiet common

Wolf man is correct, Hold mine up with a heavy bungee cord 1/2" & will strech the cord about 8" to 10" when curled all the way down. Have made a plastic block to clamp around hoses to attach bungee & large hose clamp & 1 chain link on loader frame. Also crimped the wire hooks closed (On the...