Search results

  1. D

    Kelly loader with free tractor....

    Well, I saw this ad and figured someone needing a loader might find it interesting. It's not mine. I know nothing about it, other then what's stated here. https://wichita.craigslist.org/grd/d/shenniu-tractor-kelly-loader/6188066067.html
  2. D

    B7100 Overheating

    KC, sounds like you're out in the tulies. How about a pump up sprayer like you'd use in the garden? Fill it with water and remove the screen and hose it out every once in a while as your working in the bramble patch, where a rabbit wouldn't go.
  3. D

    B7100 Overheating

    Easiest way to test a radiator is to find someone (usually a good mechanic) who has a lot of test equipment. They have a radiator cap that has a hand pump that allows them to put the cap on your system and pump it to the pressure required (like 13 PSI) and then wait to see if the system holds...
  4. D

    B7100 Overheating

    KC, you seem to take my comments personally. Nothing intended, only trying to make sure if someone comes to this thread way down the road on an internet search, they don't leave with the idea the cover on a B7100 is an ornament. Kubota calls is "dustproof net". It's purpose is to protect the...
  5. D

    Newbie Needs Help - King Kutter 48" Too Small?

    What's the dimension on your rear tractor tires, outside to outside? 48" cut won't cover it. Unless you just like mowing, it's too small...plus you have to buy a PTO shaft to make it work. I wouldn't BORROW a mower from a neighbor. Just an easy way to cause grief, especially after you modify...
  6. D

    B7100 Overheating

    KC, you need to take more precaution with your B7100 cooling system. According to your report you added over 3 liters of liquid. Running an engine in a deprived state of cooling fluid is how you end up with a blown head gasket and perhaps a warped head. "Buy or fabricate a good grill guard...
  7. D

    Brush Hog Advice

    You'll be fine. What do you intend to mow on a regular basis? If the growth is 4' tall go through it slow first time, then the second time if your tractor struggles you don't have to mow a 4' swath. Cut the width you tractor can handle. The most important thing probably is to keep the...
  8. D

    B5000

    From what I see it's a Gray tractor with .5L, 2 cyl, 9HP engine. Here's a link that may help you some. http://www.orangetractortalks.com/forums/showthread.php?t=1867
  9. D

    L3800: can I move a 1200 pound generator?

    Lugbolt, when you hear about that type of accident (the bale rolled off of the tractor and onto the operator) how are they loading the bale? It must be with a double fork under the bale, and the bale is just setting on the steel, nothing holding it in place? I use a bale spike which has a...
  10. D

    Internal lathe threading

    See, that's the problem...."twomany"!:D:D
  11. D

    Hedge Mowing

    I have a neighbor who use to put a small Allis tractor with a sickle bar mower on it, on a hay wagon. Then pull the wagon with the sickle mower running along the hedge row to trim it.
  12. D

    Just bought this L3400

    Rick, nice....but you're suppose to pretty it up, not mess it up!
  13. D

    Couple questions

    Does this look like your deck, on page 15? http://products.jacobsen.com/img/manuals/4246490_312_a.pdf?m=1331664411
  14. D

    Couple questions

    Your belt looks like it should come down around the pulley by the arrow and ride on the backside maybe. For sure the belt is too long as it's wrapped now, but I would not add a pulley. The tension spring, as 85Hokie mentioned, is not doing anything. The belt has to be re-wrapped to create...
  15. D

    L3800: can I move a 1200 pound generator?

    Find something like this and use your 3 pt...
  16. D

    Cheaper source for tie rod ends?

    I think he's looking for the ends, not the boots.
  17. D

    Digging a pond

    Helomech, I thought from your first pictures you were building an in ground silo for enslige/silage.
  18. D

    Gopher Getter

    I was talking to a buddy who purchased some kind of funnel made to go over the automobile exhaust pipe at the local farm store. You attach the funnel over your exhaust and stick the other end, with a hose like from your shop vac, in a fresh mole hole. According to the report, 20 minutes...
  19. D

    ZD28 mower.

    The only answer I can think of, it leaks out because it's less resistance then staying in!:D Remember, the quality of your question directly affects the quality of your answer! But just guessing, probably have a bad seal on the bottom, if ALL the oil is out.
  20. D

    Something so simple

    Frank, where did you get that special washer?:D Nice idea. You have a patent pending?