Search results

Yes -on the bracket for the valve - pretty easy to mount it just abpve the top od the fender. I have some very inexpensive coupler brackets I made for the ROPS rhat dis not work out for me. Just need to verify they will work fpr you

I am on the road right now but when I get back to the house I will see if I can mock up a ROPS mounted cage for your octopus. Dan

Careful - in Kubota speak the tractor "outlet" hose connects to the backhoe "inlet" hose and vice versa. When looking at a diagram of just one side you need to keep that context in mind. You know the loader power beyond hose is the tractor "outlet" hose. You need to determine which hose on the...

The block has three ports. Ùpper right is pump pressure out to loader Upper left is power beyond ptessure return from loader Bottom center is tank return from loader. To hook up the backhoe disconnect upper left hose on block and reroute to IN port on backhoe. This is pressure return from...

Real life experience with those valves - you cant even mount 1/2" or 3/8" couplers on the ports. The port spacing is to close together. You might be able to squeeze 1/4 inch couplers in but even that would be tight. I think I gave you a 90/45 degree fitting list that will angle them outward...

TnT is (universally??) operated with the operator facing forward while looking rearward. Often with the machine in motion. Dan

L3130D not L3130DT is the correct model number. Dan

Then a 6901-08-04 port adapter should be damn close to the geometry of the port on the OEM cylinder. Dan

With SUDT2 you should be able to go years on both oil and filter without any concerns about moisture. Dan

I am talking about the hoses not ports. What size hoses do you have now? You can also use a short (6") length of 1/2" tube and 90 degree male ORB x male JIC port adapter that would give you pretty close to original clearance. Dan

You dont need 1/2" fittings on something like that and you can get even more clearance using smaller hoses with 90 degree male ORB hose end fittings. Dan

Two points: Rear remotes are most commonly used when the operator is facing forward You do not want the hoses running over top of the handles Dan

How long will the 3pt hold a raised implement after you shut off the tractor? Dan

My 8N gets nothing but non-detergent thinned with kerosene in the winter and SAE 90 GL1 pure mineral oil the hydraulics. Thats what it was designed for 😁 Dan

Gŕeat. Now if you want to speed that puppy up consider one of these. https://www.magisterhyd.com/product/1-spool-x-21-gpm-hydraulic-log-splitter-high-speed-control-valve/ Dan

Read the manual a couple times and relax. No need to baby the tractor or to change any fluid at 10 hours - 50 is more than soon enough. First thing I did when I took delivery of my new L3901 two years ago was push a path through a briar patch. First scratch anxiety over in a flash. Dan

The safety interlock micro-switches used on the L01s seem to be ummm "less than robust". Dan

JIC 08 - finger tight and mark with a Sharpie. Then tighten 1-1/4 to 1-3/4 flats with a wrench. Dan

Or a leaky lift cylinder. Dan

Reducers??? If youvare talking about port size you simply buy the appropriate port adapter and you are good to go. Dan