Search results

If you have a pulse type fuel pump, then it could have a bad diaphragm leaking fuel inside the engine.

With the levers in that awkward position, I wonder if these accidents are all too common. There might be an opportunity for someone to market a tool or device to get the operator out of the pinch points.

Yep, the "professional" totally knackered it.

My SIL has a similar tractor that had the engine rebuilt by an idiot. While the engine was at the machine shop to correct the first rebuild he made the mistake of having the pump professionally rebuilt at a shop that specializes in such things, and the results were like yours. He then found...

Unlike a gasoline engine, a diesel has no throttle plate so it takes a full gulp of cold air every intake stroke which cools the engine. Increasing the idle speed may help somewhat since there is more fuel being burnt but of course there is more cold air as well.

Welcome, I see you are new here. Notice that the thread you responded to is over 3 years old. It takes a while to get familiar with a forum.

I have one of their coal/wood furnaces. My model has been replaced by an import and replacement parts for mine are either not available or the prices are beyond belief. Before purchase, check about parts availability and prices. My thought is that USSC was a good American company that is...

Will your new building have a bathroom right in the center? 💩

The backhoe on my new tractor drooped from day one. After being hospitalized for six weeks at the place of purchase, the patient was just as sick after it was discharged. Yesterday it was admitted to Messick's hospital and just two hours ago I was informed that it will be given transplants of...

I'll say this one more time, try a cetane booster, here is why: The cetane number (CN) is an indicator of the ignitibility of diesel fuels. ... If the ignition delay is high, for example due to a low cetane number, most of the injected fuel burns explosively. This leads to the typical loud...

It looks like the problem is the large accumulation of steel plumbing parts in front of the bracket. Could that be reduced in length? Could the bracket be moved rearward?

Sick! The decay is accelerating.

Try a cetane booster, it could be your fuel.

I only use Facebunk to search in their Marketplace. Even that is a cluster.

Loosen all the wheel bolts with a breaker bar, then tighten to the correct torque. If they were way too tight, you might want to ask for replacement bolts since they may be stretched.

While some may laugh at buying Harbor Freight tools, their torque wrenches are good enough. I have seen videos of the cheapest and the Icon brand and they are fine. Here is one video.

"Libtards know nothing about guns" "I'll put my gun collection up against yours any day" o_O ????

Did you buy a Kubota kit or select your own parts?

A moly grease is usually mentioned in the owners manual. I use it only for pin and bushing type of joints and regular grease for ball bearings.

I have a very large collection of peanut butter glasses. Photos