Search results

If it is impossible to get a Kubota dealer involved the only answer that I would have is to do a DPF delete. While many will object to tampering with emission systems, you are left with no choice. Search online for information and products to do the delete but be careful with sending payment...

I had a sticking caliper on my F250 and thought that the Ford warranty should make the repair. They said that it was due to rust and I would be charged over $700 to repair the front brakes. I said that I would repair it myself and found some very light rust that didn't harm a thing and the...

I have had hoses get pinched shut from the road salt rusting the brackets that support the hose. Road salt is another wonderful idea that promotes safety while destroying brakes. 🤬

Make a chip hook and don't allow chips to build up.

Many couplers can be adjusted, here is a link.

Grass may go dormant with heat and drought and it often has the common sense to wait awhile.

The step gets the bolt out of the grass along with the other things mentioned above. If you click on a members name and choose Ignore, the irritation magically goes away.

I think you are on the right track with the B2601. I thought the same thing about buying a trouble free new one, but the backhoe was junk that had the tractor tied up for months and the useless warranty will never make it right. Fortunately you will be side stepping the backhoe issues. I use...

I have the 54" on a B2601, never needed or wanted a larger one, you can always take another pass if need be. Get a heavy cutting bar, either straight or a Piranha type depending on usage as they will prevent the bucket from developing a smile.

Look all over the bracket and record any markings you find. Often you can identify the plastic type and then find a compatible adhesive. https://www.polyvance.com/identify_01.php

Country Clipper Challenger

I have a different brand of zero turn but it uses the Hydro Gear transmissions. I have snapped the transmission mounting bolts several times and found them loose as well. Contacting the company resulted in the usual "no one else has that problem." You might want to check the mounting hardware...

There is certainly a place for a tractor like that, I wish that a tractor was still made similar to those with some updates for safety and function.

I use Fluid Film for its rust prevention, not to keep the deck free from buildup. There is absolutely nothing left of it after each mowing. I use a Country Clipper zero turn with a standup deck and clean it completely after each 2.5 acre mowing, the last time there was at least 3 gallons of...

Take a ride in an ambulance if you want to see idiots. last week there was a proctologist trying to fit in the tailpipe. It is unbelievable that so many can't keep their distance from any other vehicle, especially tractors or emergency vehicles.

I had every intention to do a strong finish, but that last day it was impossible to do much of anything. Good luck and try to leave on a positive note however difficult.

That was one of the first things I was taught many, many years ago. I think "brake steering" is a more recent description for the twin pedals.

Perhaps the motor is overloading because of bad bearings or friction in the pump.

I keep some old plugs to use for testing. I gap them at double the specification to allow for the no compression.

Louisiana ranked worst state, sounds great!