Search results

Nope, installed in last week. sorry.

How would the Wicked tooth bar work on a BX? On my 1880 the bucket edge isn't removable so would I have to drill all of those holes through the edge? Have to say the idea of only drilling 2 holes is preferable.

Finally got to install my Kens Hooks on the BX.

I think you have nailed the problem. I take my loader off every week to mow and after a bit of trial and error I can get the loader back on in 2 minutes or less now. I always remove/re-install on concrete. If you are doing it on the ground things can move allowing the smaller parts to bend...

This for the box and the support? If so I will take it.

What if you have a single lift cylinder as is the case with my BX. Have 2 Ken's hooks on the way. Figured I would put that inboard of the quick attach arms a few inches.

That's why I bought the Kubota to work smarter no harder.

Watched the hour meter click over 100 in just under of year of ownership. Went by quickly.

Found this video. Pretty cool. You were correct GreensvilleJay

I have a BX1880 and don't know what this slot is for. I suspect its for a 3rd function or something, but not really sure. Thanks

I use a Faza F/150 on my BX1880 and it fits great. Though I do need to make sure the ROPS is up or the edge of the cone hits the ROPS when folded down. It can hold 2 50lb bags of fertilizer with some room left over. Got a great deal on it at our local feed/farm supply.

Pulled a few posts the previous owner set for grape vines or something. Took some work and pushing the poles to loosen them up, but i eventually won. I know I need some hooks on the bucket, but don't have them yet. New 5/16" chain worked great though.

Just watched this yesterday. Weird coincidence. Nice and thorough video of it going in.

Thanks for the help.

Found these on Amazon...

Can you replace the lower pins with cat 2 ones if they bolt on? Would seem to be a better solution than bushings and probably cheaper. Does the top link pin size matter? I don't have a quick hitch so just wondering...

I am looking to replace the blades on my 54" MMM and there are tons of choices out there. I do not have the mulching kit, but didn't know if mulching blades would help or just be a waste of $$$. I tend to hit some rocks and skim tree roots from time to time so something tough would be nice...

Gave my Kub its 50 hour service this weekend and cleaned up the MMM and sharpened its blades while it was off. I don't know who put the filters on, but they were way tight. All in all it went smoothly. Amazing how much dirt and crud get under there even with the mower in place.

Looks good je1279. My BX has the same style bucket reinforcement across the top. Did you have to drill through 2 layers of steel to have the bolts come out inside the bucket? Which parts did you order? What Ken's shows for the BX bucket doesn't match what I have.

Beatiful wood and grain. Nicely done. Going to clear coat them?