Search results

If you want to control a top.link you dont wantca third function. Put a cheap valve back by the seat. Like I said about $200. Dan

Thats the loader valve outlets. Dan

Not a snowballs chance I would pay $1900 for that W R Long kit. A $700 third party kit works fine and is easy to install on your tractor. Dan

The factory remote valve option was a two spool monoblock. If you want a 3rd spool you will have to add another valve. Kubota does not have an option for that so you would have to roll your own. Looks real easy to plumb in - figure roughly $200 for a valve, hoses, and another set of outlets. Dan

Kubota goes out of their way to make part numbers opaque. The OEM coupler that Kubota part number identifies is an ordinary off the shelf Faster HNV 1/4" coupler with 1/4" NPT female threads. Faster HNV couplers are ISO 7241B and will interchange with any other ISO 7241B coupler. Please...

I will bite. What are the strange looking elbows screwed into the ports on the cylinders? I have never seen anything like them before. Dan

if I lived that close I would have a reserved spot in the parking lot 😛 The only downside to SC for me is the cost of shipping and I see they have now added a lower cost USPS option. Dan

My money is on something in that linkage 😀 Dan

You left out blood. This is my first and last time looking at this thread. Somethings you just cant fix. Dam

Heres what I think. If you start it and suck more junk into that common rail fuel system the $300 number could easily pick up another digit. I would tread very lightly until I was sure the fuel in the tank AND the fuel delivey system is clean. Dan

That should be easy to determine from the holes in the crankshaft. Dan

Surplus Center wants $9.70 for an 18" OTS NRP Jones R16 hose assembly. It costs me more than that to make one. Before I started making my own hoses I bought and stocked them in assorted lengths...

I see no need for an apology. We are ALL born ignorant and most of us spend the rest of our lives filling in the gaps. Dan

You need a Kubota scan tool and someone that knows how to use it. I suggest you book a trip to your dealer. Dan

Its been quite a while since I last looked at the throttle mechanism but IIRC its pretty damn simple. Have you looked to see if its doing anything strange? Can you alter the behavior by manually manipulating the arm on the speed control plate? Diagram beliw. Dan

You beat me to it. Dan

I looked at the parts diagrams for the hydrailic system and I think I understand the question. You cant just replace that union with a tee but yes are on the right track.. Can you post a picture of those pipes? The diagrams show multiple different options for that plumbing. Kubota supplied an...