LX2610SU Third function comparison and advice.

[EC135P3H]

I just picked up a new LX2610SU. The dealer price to add a third function is 1900 ish and that is a WR Long kit. I’m fairly confident I can do it myself. Would you buy the WR long kit or the Kubota OEM? From what I can tell the Kubota kit is a little nicer with hard lines and apparently the control head is “better”? both are about 1k. WR long a little less and OEM a little more.

The Kubota OEM kit doesn’t come with couplers. Im planning to purchase the Catawba 55 grapple and can specify 1/2 ag or 1/2 flat face couplers. Im not sure which type to go with and what type to order if I buy the Kubota OEM kit. Any pointers are appreciated. Thanks.

 

[S-G-R]

I've had two Kubota third function kits with 0 complaints. Landpride also makes a third function. Is the WR Long a true third function or diverter?

 

[EC135P3H]

I've had two Kubota third function kits with 0 complaints. Landpride also makes a third function. Is the WR Long a true third function or diverter?

Pretty sure its a true third function.

Third Function Valve Kit for Kubota LA534 and LA535. Does not work with Single Lever hydraulic swift-tach and cab combination, however does work with all other combinations. (VKKULA534)

cattachments.com

Kubota #B7368 Kubota LX Series Third Function Kit - ROPS

OEM Kubota Kit 3rd Function Valve Kit for LX2610 / LX3310 w/ LA535 Loaders - ROPS Model Tractors *Must order hydraulic line quick couplers separately* Install Instructions Packing List

www.messicks.com

 

[North Idaho Wolfman]

OEM and Flat Face couplers.

 

[MOOTS]

Has the routing of hoses changed on the OEM for the LX, is that big obnoxious loop still there?

@EC135P3H I installed a summit kit when I had my LX and was happy. There’s a thread around here somewhere with pictures.

 

[TheOldHokie]

I just picked up a new LX2610SU. The dealer price to add a third function is 1900 ish and that is a WR Long kit. I’m fairly confident I can do it myself. Would you buy the WR long kit or the Kubota OEM? From what I can tell the Kubota kit is a little nicer with hard lines and apparently the control head is “better”? both are about 1k. WR long a little less and OEM a little more.

The Kubota OEM kit doesn’t come with couplers. Im planning to purchase the Catawba 55 grapple and can specify 1/2 ag or 1/2 flat face couplers. Im not sure which type to go with and what type to order if I buy the Kubota OEM kit. Any pointers are appreciated. Thanks.

Not a snowballs chance I would pay $1900 for that W R Long kit. A $700 third party kit works fine and is easy to install on your tractor.

Dan

Dan