Search results

I assume it lifted when you drove to the pickup point? Does the bucket curl and dump? Dan

The power beyond port is pump pressure supply. Can you post a copy of the instrctions for the 3rd functions. Dan

Put in a 220V 60A subpanel. Less money than a generator and its branch circuit ready. I have one of those Lincoln tombstones and even with 100' of cable its never tripped the 50A breaker.

You are describing a hydraulic shuttle shift. The column shifter operates a hydraulically actuated reverser and the gearbox can be synchronized or unsynchronized. I dont know the specifics of your particular tractor to say exactly how ots supposed to work. I suggest you read the section in the...

Essential if your fireplace insert is a gas appliance. 💡 Dan

You indicated you have a shuttle shift. Which clutch are we talking about? Dan

Most of the ones made in the past decade do. Ram pickups are a notable exception :devilish: Dan

I think you can relax. I have had CC in the rears for almost 30 years and zero signs of corrosion. I think the coatings on Kubota rims is a little better than the coatings on the old 8N which only lasted 70 years. Dan

Are you shifting without using the clutch and does the grinding noise go away once the tractor warms up? Dan

This is how these installations get screwed up and may well be part of the problem with tgat dealer installation. I don't have any of the instructions but the only "caution" I know of is to NEVER use the backhoe tank return for power beyond. In other words use the loader valve power beyond to...

Goos info but what backhoe caution?

Like I said - lots of different Landpride kits. I assumed the second one I pictured (380-289A) was the one you have. Messicks lists it is for use on multuple BX80 series tractors including the BX23S-1 The only 3rd function diverter kits I have seen are used in conjunction with a 3rd function...

Messicks thinks differently because they explicitly state its for the BX80. Here is their other BX80 kit - presumably the one you have. It lists for $895 plus shipping. Dan

Landpride makes at least two different "OEM" kits for the BX80/LA340. Here is one that is for all practical purposes identical to the $700 Summit kit. Messicks wants $1150 plus shipping.

That EXACTLY the type of faIse equivalency that permeates these discussions. Dan

PI eaters r irrational :rolleyes: Dan

The Amsoil engineer is partially correct. If you read Kubotas .test report they tweaked the formulation in two areas; They lowered the base kinematic viscosity slightly (both KV40 and KV100) while increasing the viscosity index The goal qas to increase low temperature flow through the hydraulic...

Not a bad pizza oven too. You definitly eat this pie with your fingers!!l Dan

Here is the old Garland. It was still cooking good as new but getting shabby. Dan

The pecan pie was 50 degrees lower. I think I need to find my oven thermometer