Search results

https://www.hofheld.de/heuernte-am-hang/ That looks a lot like West by God Virginia. I am glad I do not have to hay that every year.

I'm green with envy!!!!!!!!

I wonder why this regen stuff can not be removed from the engine after the warranty is expired. When is the emission warranty ended? Is it legal? I am all for clean air but if the system does not work correctly when it is new what does it do when the machine gets some time on it? My brother...

Harbor Freight 29mm, 30mm, 32mm, 34mm, 35mm, 36mm, 38mm Set for $49.99. SKU# 62842 1 and 3/16 = 30mm.

If it was running and started to act up I would first replace the fuel filter. Do not waste your time looking at it. They all look good. Replace it. It is not that much money.

Wear bib overalls!!! http://www.workersworld.com/store/pc/viewPrd.asp?idproduct=1369 Those chest pockets are great for the phone and the wallet. My dad always carried his wallet in his buttoned pants pocket and then he lost it one fine day while plowing the garden. We found it but he always...

Just a quick question. Why are you fixed on the width of your rows? If you are just starting (good for you) could you adjust the width to work with whatever tractor you could find? As a kid we started with a Farmall Cub. The spacing for the gardens was set by the width of the cultivators. We...

Maybe rent one. How often would you use it? Just think'in

It is way more then you need. I would check out the HST L2501. It is the same size but less money and should do everything you wrote about. It is also a simpler tractor i.e. less to go wrong.

According to the Woods web page, https://www.woodsequipment.com/productDetails.aspx?id=332, the mower is 206 inches wide. That would make it 17.16 feet wide and cut 1 to 5 inches high. The page says it requires 40-80 hp at the pto. According to tractor data the L6060 has 53 hp at the pto. So...

I sent you a PM. BigG

Have you jacked it up and checked for unusual play in the tie rod or front end bearings? Check to see if the tie rod is bent. Run it down the paved road and check to see if if it is pulling to one side. If you can set the wheel straight and look for a difference in the tilt of the front tires...

Maybe you bought it in 1990 but when are you going to use it? Great job of fabing the hitch.

How big are the saplings? I have planted saplings when reclaiming in a coal mine with a spud bar. Stab it into the ground and move it back and forth to create some space, insert the tree, remove the spud bar and take the heal of your boot to close the hole. Repeat for hundreds of times in a day...

My boys just put up a tarp covered garage from Harbor Freight. It is $174 this week 10 foot by 17 foot. For $50 more dollars you get an extended warranty that will replace the tarp for any reason for 2 years. The pros are: the tubing is 1 3/8 inch diameter. Long enough for my L2501, FEL, and...

When I bought my l2501 I had the plumbing installed for the grapple. They did everything including the couplers. The only problem, no one sold the other half of the coupler to install on my grapple including the dealer.

I took a quick look at pictures of your tractor. None showed a mmm to worry about interference between a mower and the tire. Does the front turn sharp enough to rub on the frame when it is turned all the way left and right? Some one is going to ask you if the circumference between the tires is...

"pgmrdan, this is the third post I've see you asking about if a BX can handle something. In the year I've had my BX 2370 I've yet to find something I can't do, just a few things that take a bit longer, usually it is traction or loader capacity that is the limiting factor, not power. While...

If this is your only tractor then put a male on one line and a female on the other. Then you will ever have to worry about hooking up the lines backwards.

72 inch 3 point disc will cover your tracks. For a food plot I would look at the weight of the disc and get the heaviest that the tractor can lift. If you can not find a heavy weight make sure you can add some weight to improve the chopping ability of the disc. Add a log or a piece of an I-beam...