Search results

No fluid in new implement. You will need to add hydraulic fluid after hooking it up. Air will work its way out when you first use it.

You might want to advertise your equipment on TractorHouse. I have sold two Kubota’s on TractorHouse. 1st one I sold advertisement was free. 2nd was $220 for 4 weeks. Listed on the web site and magazine.

Still waiting. 3rd function installed. Wheel spacers installed. Still waiting.

I just installed the LandPride 3rd function on my LX2610. Completely different setup on mine. Valve is located on the inside of the left loader support. Hydraulic lines are routed on the inside of the left loader boom, and are hose, not steel. But, my 2610 does not have the single point loader...

So, how long did you have to wait for your SGC0660? I ordered mine in late December. Supposed to be here next week. looks like a good fit for your L2501.

Yes you can have the mmm with the backhoe. Taller tires will make the 2610 a little more tipsy.

No regen on your 2680. Greased Lightning is a good product to remove soot on your loader frame.

Take the bucket back to your dealer. Let Kubota tell you if it is under warranty or not. Kubota might be interested in this failure.

Will not work. BT601 subframe is integral to the BX24/25. You need a BH77 from Kubota for your 2650.

How many hours on your B2650? Is it still under warranty?

That is what led me to ask the op the question. May not be the problem.

My bh77 on B2650 is mounted on a subframe.

Does your tractor have position control? Is so, check to see if position control is in the lowest position.

With the ROPS folded in the middle hole, I have no trouble entering and exiting our garage. I am 6’ and the seat on my b2650 sits higher due to the backhoe and reversible seat.

I have a LandPride RTR1258. The push button is a pain. When I unhook the pto shaft from the b2650, I move the pto selector to “mid” pto only. This allows the rear pto to rotate about 1/2 turn. This takes the pressure off the pto shaft and that in turn release the pressure on the button on the...

I bought a large oil change bucket at walmart and drained the hydraulic fluid into it. Then just reused the hydraulic fluid aftet changing both filters.

My 2650 runs a 5’ Woods finish mower with no problem. Mowing up hill on a steep bank, I do have to ease up on the hst to keep rpm’s up.

Are these Purple Martins on this tower?

https://www.pillareq.com/buy-parts/KUBOTA-PARTS-Part-K5772-71110-OM-MANUAL-INSTRUCTION-RC-5436030/ Try this link.

As mentioned above: check your gearbox mounting bolts. My Woods 48” loosen up and I have to snug them up about once a year.