Search results

Apparently, many people in this country failed Constitution in 8th grade, or weren't properly taught Constitution. SCOTUS makes no laws. Roe V Wade was not a law, it was a ruling. SCOTUS determines the Constitutionality of laws. The Constitution is pretty clear on most matters, especially...

Use Hot Shots secret. It was independently tested beside all the rest of the brands mentioned and had the best results. It also does not take a lot to treat with, 2 ounces vs half a quart, so smaller container to carry around.

I've used something similar to that 30 years ago from Napa. Spray it on with a squirt bottle let it soak in, and the rust turned black. They all work on the same principle, convert the iron oxide into a hardened coating. The problem is, if you dont clean all the paint a good portion away from...

;) I suddenly have an urge to fry up some canned meat and eggs.

Here is the install manual for the Pellet stove vent pipe. Do NOT use B vent, it will melt. Proper venting for a pellet stove uses gaskets or sealant between sections, no they do not use outside air between the walls, just air gap, and must maintain minimum 1" clearance to combustibles and yes...

I tried that once...once. LOL Pushed the damned thing into the dirt at the back of the barn trying to line up to the subframe and nearly dumped it over. WIll need locking wheels to keep that from happening. The woods comes up from the bottom into the notches, and then slides into slots. If...

It's true, a Smartass in every crowd. 😎

I bought shelving for the barn. Industrial grade, 2000# per shelf capacity. The parts are still stacked against a wall because of the work required to clear the area I plan to put the shelves. WHERE DO I PUT THE STUFF!!! ARRGGHHH :D

That I can believe. ANything airplane related is expensive.

I have to do something similar for mine. I also need to build up a couple pallets to put the mower decks on so I can put them on shelves. I could use something like that for my backhoe, once it is off the tractor it sits wherever I placed it and only way to move it if in the way is put it back...

I have that Same Snap on tester. It cooks pretty good too. I have gone through more batteries in the last year than all years combined. First my wifes Focus, just died, no losing voltage needing a charge, nope, just died, after 5 years. Then the AGM in my 2018 F150 got a bad cell. Was able to...

Finally finished up the Sprayer cart and control. Wired in a socket for power with it's own fuse, then added the other plug to the control box. It is double fused built in fuse on the control box and large blade fuse holder to the socket, tapped into the 10 Gauge coming from the 30 amp slow blow...

Well, not quite. It's a lot like B vent, but heavier walled, there is an airgap between the inner and outer walls, but there is also an insulation rope between each section. It can be either 3" or 4" vent, most stoves under 30K BTU use 3", but if the length of pipe exceeds I think 50', then you...

Can always pull the glow plugs out, shut off the fuel and see if it cranks over easily with no compression in the cylinders. If it still struggles, then you have a pretty good idea the starter is bad.

It did good, very little ram push, unlike the B2410 where you could see the tractor being pushed back and forth, only on a hard hit of heavy grass do I feel it in the cab. The baler only needs 18 PTO HP to run, so power isn't an issue, weight is, and why I went with the one I did instead of a...

Last November I installed a small pellet stove in our converted garage that is off the kitchen, previously we used a propane garage heater, but the past couple years, used an electric to take out the nip but not really heat it up, but downside, the house furnaces make up the difference, so...

Yes, it is in Silver Peak. Supposedly produces 25% of the worlds Lithium.

We do, in Nevada. What people have is more money than brains. When these idiots are tailgating me because I wont go more than 5 ove on the country roads I want to say to them, fill my tank and I wil be more than happy to waste it driving 70 in a 55.

The filters on the B2410 for air, fuel HST and oil comes out to just under $100. Since I just got the fuel and oil, the majority of the bill was just the three filters for the l4060. Nearly $200 in just filters. I still have 10 hours before it needs it, but since i was there.

Baled 62 bales of hay with the L4060 and NH 273 haybine. At least now I know that once I get the weeds out and the right grasses fully established, I will be somewhere around 240 bales per cutting, thats good for ~ $1200 in hay.