Search results

Remember Its 10 hours of loader work not 10 hours on the clock! No need to over do it!

Like mentioned its all in the top link. If you have the mounting arms of the blade level with the ground it will turn 360 degrees! Its just a little more difficult with a small tractor as you will loose ground clearance. If not level when you turn the blade at an angle and drop it close to the...

So......what happens with the BX? Gonna keep both?

NICE! Congrats Skeets! Im jealous!

Nothing like a shiny new tractor!

Skeets! Where's the tractor porn?

Retired now with tractor so I wish we would get 5 feet so I can play! Its been a few years since I had to rescue the neighbors with 4 ft drifts burying their plow truck! Nice to have a machie!

I use an amplified antenna, Its a cheap one. Sometimes not using the amplifier is the ticket depending on the channel. My antenna was $20. When I first got it it didnt work so well till I found out getting it about 5 foot off the ground made all the difference so I made a stand for it!

I ditched cable over a year ago! Smart TV and rabbit ears I can watch whatever I want! Should have done it years ago! Happy camper!

Hmmm I always keep mine snug with no play,but I am new to tractors and implements. Guess Ive been doing it wrong? I would think an implement with play swinging left to right no matter how little while working and coming to a slamming stop in each direction would be a recipie for bent arms? So...

I bought a kit two years ago. I checked it and the pressure was within spec so I left it go! Its still nice to have and will check my pressure periodically. I imagine after some time the pressure will need to be adjusted and Ill be ready!

Ahh you have a 60"'' deck I would guess you have more clearance? Bigger spacers? BUT then its a totally different deck! than my 54" for the BX23S and its different than armylifers 54"deck!(older model) Only you can tell if it will work by looking at it closely. As far as lifting the front end...

Harbor Freight sells those Hoop/Tarp garages 10x20 ft in the $200 range. Im getting one once I get a spot ready!

Just an FYI. That will still cause claerance issues on the MMM deck wheel. Turning the left rear scalping wheel to be specific. Its darn aweful close to the tire! Even without spacers my LR deck wheel hits the left rear tire when I turn it so I can roll the 54" deck out. In fact I have to raise...

I cant believe the prices on chains! Dang expensive!

Low gear and 4wd when doing dirt work and moving heavy loads especially going up and down steep grades! If your not in 4wd it will take off on you!

Great deal! Not too far! Way too large for me or I'd be all over it! GLWS!

No preaching here! Mine is a luxery item! It helps me in my older years and its parked in the garage next to the wifes car! :) No Vette though! No bling on it but its the best darn wheel barrow I ever bought!

Well now dare I say it........ we are starting to see the difference between folks with a working machine an somebodys waxed blinged out spotless luxery item used on occasion then parked in the heated garage next to the Vette!! Oh boy....here it comes!:)

Henro if it happens with a half bucket of light material id say theres a problem! I only have a bx and it only does it when the bucket is near maxed out.