Search results

One inch of travel aint much!

I did the same! Eliminated almost all my trim spots!

Im with you brother! Tractor supply hasnt had Kubota orange since last spring!

BTW what machine was this? Edit I just noticed it in the title. Need more coffee!:rolleyes:

We learn our best lessons through the mistakes we make. I think we have all been there did that. Dont beat yourself up!

You nailed it! Those stumps are too large and if you cant get the machine all the way around the stump to loosen it that is another limiting factor! You will just beat the heck out of your machine and FEL!

Really? You just joined a Kubota forum to TOOT your Bobcat horn?

Not sure how easy it is to remove the FEL and BH on your model? On the BX its about 3 minutes for both!

These quick couplers need to be clean and must go on straight as suggested. If you are too far away and try to connect it while its crooked you will ruin the o rings and develop leaks. Mine is still tight and right since 2017 and I remove and reinstall my FEL quite a bit.

The backhoe for me was the ticket item even though ill be done with it in a few years. Rentals are expensive and you pay even if it pours rain the whole week and you cant use it! Having your own its there whenever you need it and no worries about hurrying up because it needs to be returned! If I...

My BX23S with belly mower cuts real nice! It looks like the golf course when Im done. Maybe you need to check your deck for level? Check tire pressure. Also run the mower deck at pto speed!

At first I said no to the mower deck also! Then I thought about all that money just sitting there in between projects and waiting for snow. Well I got the mower deck and now I mow my lawn in style! No regrets! Everyones situation is different!

Not sure what discounts are being given nowadays but you may save some money buying the deck when you purchase the tractor!

They wont hang down if you raise the 3 point hitch then turn the mower height adjustment knob to T for top! Now when you use the 3 point it will stay put.

Looks like you found one?

Your 3 point is normal and while in use has no reason to go any lower! As said your implements need to be blocked or raised off the ground to make hook up easier. I just set my implements on some 4x4's.

Glad to see you got the correct pressure reading! Directions do come in handy now and then! :rolleyes:

When I bought my machine there were about 300 pieces of equipment on the lot. Not one was under cover! My BX may have sat on the lot for a year? I keep it in the garage for winter, but the boat just took its place so the bx spends summers outside! NOW if I could talk Mama into parking her car...

Kubit ......This is not a correct pressure reading iif it is taken correctly at the loader valve! You can not lead people to believe they can raise or its ok to raise pressues to 3060 psi!

First off why not take the reading in the correct place the correct way??? Remove the loader valve quick disconnect (its easy) put gauge on line closest to operaters seat, start machine bring RPM's up to 3000 and bury the joystick, check pressure reading! Easy peasy! Thats how my directions read...