Search results

No you don't have to remove the Floorplan. There are 2 parts to those lines that make a connection under the engine. Now I will say I have a salvage yard and all my experience with Taking them off is after the loader frame was already removed. So there is a possibility you may need to remove the...

It works very well. No complaints

I will do that. What parts are you looking for?

I just bought an ati ssqa for my la351 loader. Seems very well made, actually better than what comes factory on kubotas.

Hate to hear that. Check that area real good. I've sold a few axle housings that were cracked in that area and were leaking.

I can't think of anything off the top of my head that has bearings but isn't sealed inside a case or something other than the carrier bearing. The propeller shaft has balls in the couplers. Plus 3 balls missing you'd probably know it. I could be wrong but I'm thinking it didn't come from the bx

Yes it still has the valves in it.

Looking good. Before you know your long awaited dream will be a reality

Short answer is no they are not. D650 and d750 share the same head and d850 and d950 share the same head. But there have been a few exceptions to that rule. I have a good d950 head available

This is the relay. Mine do not have the harness just plugged into the relay but that would probably be easier AM107421 Improvement Starter Relay Kit Replacement for John Deere Models 160 316 420 F930 160 165 RX63 https://a.co/d/djs3Jro

The b1700 2100 2400 were known for weak voltage going to the solenoid. And yes @North Idaho Wolfman a relay was the fix for it.

Most of the hub problems on the old B's were due to wear and people never tightened them. One could also say a bad design as the new style hubs are far superior but that's the case in all things. As far as the 2400 goes though the hub design is very similar to the new style sold for the b6200...

I'd definitely do a subframe on a small tractor. But call woods they actually make a subframe that I believe works on the bh650 as well for your b7510. Could be wrong so please verify

Loaders for old B tractors are hard to find. But I agree spending a few grand vs 25+ grand on a new one sounds much better. On the flip side even just a little newer than your 1550 such as the b1700 b2100 b7500 etc have far better loaders and a lot more capable than the 1550 with a loader. Just...

Like @North Idaho Wolfman said it will be very slow. But you can replace your hydraulic pump with one from a b8200 (there are 2 types and direct drive right hand and a gear drive left hand. You need the direct drive right hand) to increase your gpm from 3gpm to around 6gpm to help with that. It...

I feel fbook somehow must be making money off these scammers somehow. It's just too easy for them and they don't do anything about it

Dang. I hate that for you man. One of us will run across something someday soon hopefully

B6000 with loader isn't seen very often. And with a backhoe even more rare. There are a few around but not a lot. Nice setup. It's small but mighty

i agree with @TheOldHokie. Unfortunately it's gonna need a new hst unit. Open that hst up and I'm sure you'll see swash plate pistons etc eaten up. Check the charge pump also may need that as well. Plus a good thorough cleaning. There is a guy on ebay selling them for around $4500. Otherwise...

I have a d950 that I bought with a tractor the guy said he tried to rebuild it but it wouldn't run. Haven't done anything to it I have a d950 that runs good and has good power but has blowby And I have a good running d650 from a b6100 All would need to be picked up in attalla Alabama Thank you