Search results

Your looking at a full tear down. Transmission has to come out to remove the front cover to be able to see shafts and gearing inside.

Just wanted to share this experience to possibly help someone in the future. Customer had a bx1500 and wanted a loader. I had an la211 loader available from a bx2230. Hydraulic block and hard lines going from transmission under and over to the right side were the same as la181. Mounting...

Most likely the steering cylinder is bad. Don't turn well when cold but work better as fluid heats up.

I stand corrected. Sorry long day. Thank you @North Idaho Wolfman for correcting me

Is the bushing to small for the hole? Some wear out and the shaft wobbling around in there will make the hole larger in which you'll have to have a machine shop make you one or replace flywheel. I have several flywheels if you need one

No sorry I sure don't. I wish you luck in your search though and glad to help anyway I can. Thank you

There is the large terminal on the solenoid where positive from battery goes then there is a small terminal with probably a spade connector on the solenoid next to it. If you jump across those 2 terminals the engine should turn over. If so that eliminates battery, starter and solenoid assuming...

Radiator genue like @imnukensc said is huge help. The bx by design are not the most cooling efficient machines and summertime mowing is when you notice it the most. Could be a few things but if you could get an infrared thermometer and see what the temperature difference is going into thr...

I have the back end of a b6000e 2wd. But like @North Idaho Wolfman said if your looking to swap rear ends a b6100/7100 is the way to go. If your just looking for 3 point parts I have most of it. I just don't have the right side adjustable lift rod. Sorry no tiller parts right now. Thank you

Check your messages I sent you his number

I'll get his number for you and send it to you in message

Good afternoon. Unfortunately I don't have those 2 items. The b7300 uses the same side panels but I only have a right side, no left. The grill is one I'm curious about myself. By part number it doesn't cross over to anything but a b7300 but It may work on a b7500. But I'm not sure. If your...

I have all the deck mounts on a b2100 which takes the same deck. I'll do some research as to if they are the same for a b7500 but I believe they are. What all do you need?

Interesting. I haven't seen one that bad and not in that area. You could be right just overtorque but who knows.

Thank you @Russell King . I have a couple bad sector shafts laying around I'll do some measuring on. I do have I believe a good complete steering gearbox assembly from a b6200e which would fit your b7200 assuming it's gear drive. It'll be this evening or tomorrow but I'll get back with you. As...

Unfortunately you have to remove the transmission to.replace that seal. It is labor intensive but looks like your halfway there

You are correct. They are just so hard to find I just wanted to give you more options to expand your search.

No there is no in frame kit. If you replace the sleeves you'll have to have a machine shop bore then to size. You can also get oversized pistons but will still have to have a machine shop bore it.

I would think lift point would be at the ball of the arm. I have the pats quick hitch and overall love it. It's on a l2501 so a little bigger but no issues with bush hog, box blade, auger etc. So much easier to attach equipment. I did have 1 shim fall out and had to replace that and it seems...

Join the group. Many people looking for one. I don't know what tractor your looking to put it on but la351 would also be an option. Of course la271,272,301,302 would be options as well with lower lift capacities