Search results

Woods makes subframe backhoes for it but finding a used one is near impossible, if you do it likely won't have the right subframe, and new with subframe will cost you considerably more then picking up a used bh77

La401 wouldn't be a direct bolt on loader. You'd have to do some fabrication to make it work. And yes a 6' bucket could be a bit much for a 2100 depending on what your doing with it

I apologize I didn't realize I cut off the model numbers of the buckets.

I don't recall there ever being a 12" rim 8" wide in the 4 bolt pattern. There were some rare 10" 4 bolt in a wide but never seen a 12. The 2wd is a different bolt pattern but there were several wide rim's for that. The 4wd 7100 for a 12" rim is a skinny to run a 6-12 ag tire. I do have a good...

Have you looked under the seat where the lever attaches to the 3 point top plate and see if anything is jammed up there or debris keeping it from moving?

Interesting. I'd call them and ask. I have a bx24 and it fit.

This is from the 2016 wholegoods catalog.

I sent you a message

Bxpanded also has a quick attach mount and one of the attachments is a 2" receiver

By the Pic it seems like maybe you could jb weld that but then you have to ask yourself why did it break there. That front case cover is a very expensive piece. It's a DIY if your mechanically inclined but is very labor intensive to get the transmission out. If you decide to replace that front...

Yes sir I have one and I replied to your message. Thank you

Once you remove that cover the seals just pop out and you can put new ones on. You'll have to drain transmission beforehand of course.

Loaders for kubotas are very hard to find. Most people don't sell them after they buy a tractor. There are aftermarket loaders you can buy but will cost you. Good luck in your search

Well I take that back. I do have that. It is the same as a b7100 which I do have.

I sure don't. The only b6000 I have is 2wd

Yes it will. La351 came on the b2400 which is identical to your b2100 just more hp. That's what I have on both my b2400. Great loaders

Don't limit yourself to just the la301. Pretty much any loader from b1700 b2100 b2400 b7300 b7400 b7500 b7510 b2410 etc will fit. Maybe a few very minor modifications

Yes sir. Maybe one day I'll find one

Good morning I Updated the list with new tractors. Please let me know how I can help. Thank you

My apologies I'm a little more old school and I don't belive you'd have fuel come out of there. Have you tried opening that valve again while cranking it? If it starts then close the valve while it's running.