Search results

I have a b2400 hst and I am having an issue with power steering leak. I have the h11501 steering controller. I have changed the top seal twice with no luck. I have now found there is another seal inside. Number 360 on part listing. Has anyone dealt with this before and if so what else should I...

The part number is correct. Messicks listing has a picture and it shows the wider plastic piece that you have as #210

Yes. I'm sorry I misread the .022. I looked at messicks listing. There is a picture attached to the part #210. It is showing the wider plastic washer

Also since you seem to be new at this. If you open anything that requires gasket material permatex 51813 anaerobic gasket maker is what you need to put it back together. It is the equivalent of 3 bond 1208d that the manuals refer to.

I would have to say the nylon washer is not the correct part for there. It should be #210 on the partsdiagram. According to the listing all the way to the right it says it measures .022.

I finished repairing my 3pth hydraulics on b2400. New control valve, new seat poppet and spring in relieve valve. I measured the shims that came out and replaced with new. Actually have slightly less shim now than was in there. My question is the relieve valve is popping at 2000psi. Factory...

Does sound like mine did when I blew u joint in front driveshaft

Yes. And it refers you to page numbers that don't exist

Actually still missing the same pages. If I use 2410 manual it has what I need. Assume it the same

That was too easy. Thanks a bunch. Keith

I have now downloaded 2 wsms from 2 different sites for my b2400. They both cut off he Last several pages. Ironically these are pages dealing with the hydraulic cylinder case for 3ph which I am working on. Does anyone have the needed info?

Good place to start. Thanks

Yes

Having an issue with b2400 front rear leaking bad at the swivel joint. Changed the seal about 2 months ago and is leaking bad again. Any ideas????

Looks like your serial number is 66143. It's on the sticker

🙀

If you haven't found yet. Try west Kentucky tractor. My local dealer turned me on to them. Lots of inventory

Try West Kentucky tractor.

Same to you my brother