Search results

Played with 3pt position, doesn't change. Loader works good then acts up I guess when it gets hot? I have pressure gauge on fluid supply to the loader valve. No pressure at all. Keith

Drained fluid and checked if screen was clogged. It wasn't. No issues. Put fluid back in now I have nothing. No pressure at all to loader control and no power steering. Pump completely crapped out?

B2400 la252 loader. Loader works great for about 45 minutes the starts getting slower to lift. New loader control valve didn't solve it. Ideas will be much appreciated.

Sorry I took so long but the seal number i used is AS231E-22mmb. Had groove in housing machined to fit it. Most others are available from kubota. There were a few of the bigger o-rings had to match up as they weren't available. Don't remember which they were. Keith

I'm not ignoring you. Haven't had time to look up what I did. I'll get to as soon as I can. Working like crazy,even though I'm supposed to be retired. My son playing HS baseball which fills my nights. Keith

Size is exactly the same. Piston seal I did not attempt. Appears to be actually brass or bronze. I left well enough alone on that. Keith

Latest update. Changed course of action. Instead of trying to find the seal for the groove. I found a hydraulic cylinder/machine shop who came up with a seal same inside diameter slightly larger outside diameter and a little thicker. They successfully chocked my housing up in their lathe. They...

I guess they kept changing the seal to try and fix their design flaw. Apparently didn't work so they must have completely redesigned the unit. That's why they want you to by a whole unit. What I did was take the oring and backer to a hydraulic shop that works with cylinders and rotational seals...

I guess they kept changing the seal to try and fix their design flaw. Apparently didn't work so they must have completely redesigned the unit. That's why they want you to by a whole unit. What I did was take the oring and backer to a hydraulic shop that works with cylinders and rotational...

In the top of the unit, where the worm shaft comes through, do you have a 2 piece seal. Nylon outer that goes against the shaft and an oring inside the groove?

The h11501

I have a few minutes. Do you have the same box?

Up to may neck in auto work right now. I'll reach out to later and we can talk. Keith

Update on my power steering. The seal in my b2400. The seal in question #360 is actually an oring with nylon backer. I was able to match it to one available at my local hydraulic shop for $12. With the exception it was a little thicker. By sanding it down to close to the originals thickness I...

Anybody out there know who makes this steering controller?

Struck out on that one. Back to drawing board.

I know this thread is old but hopefully you get this. I am going through the same issue with b2400. How did you find out the controller manufacturer and number. Thanks keith

Messicks found me the 360 seal at a 3rd party source they use. At least they showed one hopefully their inventory is right. Thanks again for your input. Keith

Thanks for reply. If I find seals should thrust bearings also be changed while I'm in there? Keith