Search results

So while mowing Saturday on zero turn, cruising along suddenly it sounded like the entire deck was self imploding. I immediately turned off deck drove to the garage and found right outer blade was missing half its blade. I did not hit anything in recent memory and blades had been wire wheeled...

Shale bar

Looks similar to mine. Nothing too hard about it but takes some patience putting back together. The springs in the cylinder assemblies are extremely stiff. The pistons will keep trying to pop out on you. You'll know when everything seats properly. Don't fight it together.

Relook. Auto correct got me

When I get a chance I'll rebook at exploded view of yours. I'll have to see if it's similar inside to mine. I have a different hst in b2400

I recently had to rebuilt my hst and replaced balls and inside pivot on the shaft when i reassembled. I packed with Lucas red and tacky. I use it for everything. Back in the 80s and 90s I loved pyroplex by Dryden. Was discontinued when Castrol bought out Dryden. The Lucas red and tacky is the...

Pack them as tight as you can with a good heavy grease. About all you can do

I agree with Terryw on the shaft. It is available. Search the part number for the ball housing. There are several used and I saw at least one new one at ginup sales in Michigan

Put a shale bar between the gear head and the round cross bar above it. Use this to apply down pressure as the auger is turning. Usually gives you the little more oomph that it needs

Just saw he is also in the classified thread

In latest threads John rhr is parting one out

Did you try messicks.com. they provide all the parts breakdowns

Kubota is just under 1k

I used an after market. "I know" but funds are a little tight right now. Anyway I bought it from Complete tractor. It was $357. They offer same day shipping. Ordered it Monday nite. Paid 32 for next day air and had it Wednesday morning.

New pump. 2800psi. 😁 Thanks for the assistance

I'll order one up. Thank you Keith

I have since removed it, but this s where I had it attached.

When the bucket issue happens it's only with weight in it. Lifts ok when empty

Was able to prime pump. Now have 800psi coming to loader valve. With a stethoscope I can hear pump running but does have some clattering in it.