Search results

Re: WTB: Side Engine Panels for L2500, L2350, L2550 Hello I have the parts you are looking for. I sent you a PM. Thank you Lance

Hello I have the parts you are looking for. Send me a PM. Thank you Lance

Hello I have the part you are looking for. Send me a pm. I have lots of L245DT parts. Thank you Lance

Hello I have changed a lot of these over to run off the tractor Hydraulic***8217;s.Most people are happy with them. Yes it is not as fast as the front pump. Have you tried taking your old pump to the good hydraulic shop. You should be able to find a replacement. Kubota may not supplying it...

Hello You should have 12 volts to the glow plugs. What is the problem you are having. If you are getting 6 volts at the glow plugs , try removing the wire from the glow plugs and check voltage. I would also remove the jumper wire between the glow plug and check each one. Good Luck Lance

Hello The L295 will work. Good luck Lance

Hello You can just replace the o ring by removing the snap ring. I get the o ring from Kubota. I have not had any luck with generic Metric orings. Good Luck Lance

Hello I have a L275DT I am parting out. I have a complete running engine. Send me a PM. Thank you Lance

Hello The M4500DT is a great tractor. I have never seen one break a crankshaft. I would check with Grain Farmer (573)-225-5039 . They have a lot of engine parts for the older tractors.The six cylinder in this tractor is one of the nicest sounding engines you will ever hear. Good Luck Lance

Good day sir. I do have a set. Send me a PM with your shipping info, and I will send you a set. Lance

Hello I have the part you are looking for. Send me a PM if you still need one. Thank You Lance

Hello You can replace the brakes without removing the axle. You can’t replace the seal without removing the axle from the housing. Good Luck Lance

Hello The brake setup is much like the MF 165. Normally the steel disc are fine. I would replace the seals and gaskets. Also replace the small oring on the brake actuators, round rod that the brake pedal moves .MF 165 is a great tractor. Yes the brakes are dry, but the problem was they were...

Hello What you found is the lining from your brakes. I would not let this go to long. What will happen is you will soon have metal to metal on your brakes. Then you will have a mess. I have repaired many of the older Kubota's were this was not taken care of. You end up with fine metal in the...

Hello #1 will work. #2 with T not work. With a T the oil will always take the path of least resistance. Good Luck Lance

Hello I would do as Wolfman says. Also be sure the radiator is clean. I know sometimes it appears to be But you still may have debris in the fins. the L345DT radiator Was marginal in size. It does not take much for it to overheat. Is your air filter clean? Good luck. Lance

That is the best place to tap Into the hydraulics. Put to 90s on the steel line Run one end to the valve return the oil back to the other one. Good luck. Lance

Wolf man He is in Athol. Looks like he is just down the highway from you. He could not stand Commiefornia any longer. Looks like a lot of are leaving the state coming to your wonderful state. Don’t worry he will be a good fit in Idaho. Lance

I use Fastenal on a very regular basis. I get quotes in timely manner normally 4 to 6 hours. I do online. I find their rates extremely reasonable and their service excellent. I'm preparing a Kubota transmission now to ship From California to North Carolina. $200. my brother just moved from...

Hello If the cover is off the fuse box the first place I would look is dirty contacts where the fuses connect. Maybe even replace the fuses. You can test with a test light from one side to the other of the fuse contacts to be sure they're making contact. Great little tractor. Good luck Lance