Electrical - Wiring Diagrams
- Thread starter 85Hokie
- Start date
I just did a quick check of the BX1870 WSM (WorkShop Manual) and the schematic-diagram in in there.
HINT: The WSM has THREE parts.... look in part3
New to the site. Needing A wiring Diagram for a l3830. Mainly the tach input from alternator. Auction buy tractor says enough. Thanks
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
It really helps if asking for a electrical diagram that you include the EXACT sub model you need it for, A GST Cabbed does not have the same wiring as a DT ROPS.
Also that tractor doesn't use the Alternator for the tach, it uses a RPM sensor.
Dt rops. Ok thanks, I was told that it read from the alternator.It really helps if asking for a electrical diagram that you include the EXACT sub model you need it for, A GST Cabbed does not have the same wiring as a DT ROPS.
Also that tractor doesn't use the Alternator for the tach, it uses a RPM sensor.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
I don't know of any Kubota's that have ever used the alternator for the tach signal.
Most of these older models used mechanical tachs.
Newer models used engine sensors.