Search results

I know this has been mentioned before, but I need to know about the B2601 tractor with a LA435. I built a level indicator for my L series tractor I used to have and it worked great, but I want to add one to the new B2601 now. I don't really need it so much any more, but it would be nice for a...

I have the B2601 tractor with quick disconnect block for FEL that leaks. I am completely replacing the block and mounting bracket with a new bracket and individual male and female connectors. I do not like the QD Blocks. I have all the parts, but never got any instructions on the removal of the...

I noticed a leak a few days ago in the four hose quick connect block mounted on FEL tower on my B2601. Had a good puddle on the floor I had to clean up, and started looking around and found it leaking out from between the two halves of the block. I disconnected and made sure everything was...

I have a B2601, and was wondering if it would be worth the cost to change to an alternator for my charging system. I am running two LED lights off the ROPS for forward light and two LED lights off the rear bottom of ROPS for back hoe work in the evenings. Any thought or advise? This is the...

I got real tired of trying to turn around in my seat to see if anyone was trying to pass me on my road as I was traveling back and forth to my neighbor’s house half mile up the road as well as working around the trees on my land, so I decided I needed to install mirrors on my B2601. It was a...

I now have the FEL, BH, Mid mower and now box blade for my new B2601. Now I am looking to add two more items to make life easier. I need a thumb for the BH, and a bucket level indicator. The thumb will most likely be from BXpanded. I made a simple indicator for the L series I had with a piece...

I started doing a search on a good mechanical thumb for my new tractor and there are so many different ones and not sure what is what or what is good. Anyone have experience with the Mechanical Thumb aftermarket on their B2601? I have the BH70 backhoe.

I have been trying to find a good fitting spinner for my steering wheel, but just can't seem to locate one. I started out buying one from the Kubota dealer and got it home and started to install it on the wheel. As I was tightening the screws with the Allen wrench I noticed the nut that was...

Received delivery of my new B2601 tractor this past week and as I was using it I noticed how difficult it was to use the pedal going in reverse. I do not remember this being so hard to use when I had the L series tractor. Is there any adjustment to make it a little easier to use??????

I have a B2601 on the way, and need to get a new torque wrench. The two I am looking at have a range of 10-150, and 25-250 ft pounds. I am only using the torque wrench to do my periodical checks of the different bolts. I will have the Backhoe, Belly Mower and the FEL on the tractor. I looked at...

My previous grease gun took a dump on me and leaked all over the place so I had to buy a new Lincoln 1134. It's been working very well now for the past few years. I now have a new B Series tractor with backhoe coming in a couple weeks and I decided to change grease. I like the grease I am using...

I have a B2601 coming in a couple weeks and trying to get ready for it. I am replacing an L3200 tractor that i had sold a few years ago with this B series, and now wondering what grease to get. I will use the FEL, Belly Mower and Backhoe as I have in the past. Also getting the Grapple and Box...

I am trying to attach a rear view mirror from a car to the underside of my canopy. I used JB Weld to adhere the button from mirror to a 2"X3" piece of metal, and want to now mount the metal to the fiberglass canopy. Does anyone have any good advise on best way to attach the small metal plate...

Just purchased a new Bear Cat 5540 5" Chipper/Shredder yesterday from my Kubota dealer. Got it off the trailer and hooked up to the L3200 tractor with no problems at all. Did a couple test chips before bringing it down into the woods where I am getting ready to dig a pond for the wife. I spent...

Just bought a new Dirt Dog Blade for moving dirt and snow with my L3200 tractor. I asked my dealer about the blades he had on hand, but was not crazy about them. Dealer told me about another brand he carries but could not keep them in stock long. He said he was about to order a 7' for another...

I posted this question in Fabrication and customization, but I think I put it in the wrong area. If this is the case, my apologizes. I will try to delete the other post as not to have a double. Here it is again: Ok, so I finally find a company that offers a nice canopy for my Kubota L3200...

post relocated to "Buying Advise Moved this post to "Buying Advise" I don't know how to delete this post from here. Sorry for inconvenience. Frank

I found a canopy that I want to order and sent the email asking for more information. I received a phone call on a Sunday afternoon from a very nice man explaining all the features of their products. He was good enough to spend almost an hour on the phone with me. After thinking about it for a...

Has anyone used the Universal Quick Attach Recevier w/ Hook from "Bucket Solutions that you clamp onto the FEL? I just saw their ad when I googled a hook for front end loader. My FEL has the round bar at top, and is brand new so I don't want to weld or drill into bucket for fear of losing my...

I have a 5' Box Blade that I got from the local dealer in Danville Va. It is yellow in color, but has not tag or model number on it. It does have 5 rippers, and the lock pins slide down into the ripper well and not threw a couple holes on top of frame to lock in the rippers. The dealer tells me...