What did you do to or on your Kubota today?

lynnmor

Well-known member

Equipment
B2601-1
May 3, 2021
1,444
1,159
113
Red Lion
Maybe try the compound first, followed by the touch up method you describe?
Certainly worth a try, just don’t use one that contains wax or other coating so painting can be done if needed. Using compound first would show the extent of the damage that may need painting.
 

Jasonized

Active member
Lifetime Member

Equipment
L3902, LA526, box scraper, grapple, pallet forks, tree ripper, lane shark 3
May 16, 2023
153
42
28
California coast
Finished mods for the fel to connect my lane shark. Fab’d a few mounts, got hoses made and installed. Mounted a manual valve, so only three more hoses to fit…

Of course, shop closed… 😏
 

radas

Well-known member

Equipment
2022 LX2610HST, 3rd Function, Rear Remotes, BH77
Mar 21, 2022
719
833
93
Michigan
Moved 10 more yards around and did some more earth moving yesterday. Used the box blade to level out some other areas of the yard as well. My son got about an hour of seat time with me while I was making piles around the yard.

I used the pressure washer to foam cannon the LX, wash all the dirt off, and grease all the zerks after the old stuff washed away. I'll have an additional sprinkler zone added in a few weeks and then I'll seed this area plus all the areas I leveled.

PXL_20230603_202307753~2.jpg
PXL_20230603_202147595.jpg
PXL_20230603_202052804.jpg
 
  • Like
Reactions: 8 users

kcnsouthva

New member

Equipment
L4060HST, FDR1672, GS1572, RCR1872
Aug 29, 2021
13
23
3
VA
At the risk of ripping off one of my OTT brethren, a reward for sneaking away and knocking out my chores! Never mind the Miller Lite, i needed to rehydrate!
 

Attachments

  • Like
  • Haha
Reactions: 4 users

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,022
3,675
113
Wind Gap, PA
Sunday evening, decided I could use some more parking space since I still have a triaxle load of millings and half a load of no. 3's....so...lets do it!

Start:

Driveway 1.JPG


diggy:

Driveway 3.JPG


load out:

Driveway 6.JPG


Driveway 5.JPG


Driveway 7.JPG


Driveway 8.JPG


Needed another hour or so of daylight to finish. I should've started a bit earlier today. I will say that the mini makes this type of task so much easier/faster than with the tractor. If I had a skiddie, I'm betting it would take about 1/10 of the time as with the mini. But, the mini did just fine.

I'm betting that it will take much more time to bring loads of material in from my storage "yard". I'll get it finished up this week. It should add another 1000 sqft of parking space.
 
  • Like
Reactions: 13 users

Old_Paint

Well-known member
Lifetime Member

Equipment
LX2610SU, LA535 FEL w/54" bucket, LandPride BB1248, Woodland Mills WC-68
Dec 5, 2020
1,733
1,730
113
AL
View attachment 104118

so much for that manicure and pedicure her and momma got yesterday 😂
The raw concentration on that child’s face is exactly the look I love to see on the face of any child learning anything, when they realize “I can do that!”
 
  • Like
Reactions: 2 users

Snowman7

Well-known member

Equipment
LX3310 535 loader, LX2980, RB2672, FDR1660
May 20, 2020
367
258
63
Boyne Falls, MI.

Snowman7

Well-known member

Equipment
LX3310 535 loader, LX2980, RB2672, FDR1660
May 20, 2020
367
258
63
Boyne Falls, MI.
Had to remove a big 'nest' of hay bale netting that I didn't see in the grass along my road frontage.



View attachment 103900

I wish people would be more responsible about securing items on trailers and flatbed truck beds.

I regularly find buckets, fence wire, T-posts, hats, gloves, hand tools, hay string, you name it.

Normally I would have spotted this....but the grass was high and I was watching my mirror for traffic...since I was right up near the road. What a mess.
You may have to burn some of it out, hopefully not
 

Snowman7

Well-known member

Equipment
LX3310 535 loader, LX2980, RB2672, FDR1660
May 20, 2020
367
258
63
Boyne Falls, MI.
Thanks, that was one of my first projects when we bought the place and I learned quickly its a tad too small, but way better then nothing like I grew up with. I've got more hardwood then I know what to do with at the moment, as a guy down the road was building a house last year and I got cords and cords of unprocessed wood from him. I also have more pine then I know what to do with but that is reserved for the outdoor fire pit so I go through it much slower. I wish I could heat primarily with wood but we only have a large open fireplace which gets used a ton and being that it's a small house it's does alright. we keep the thermostat at 58 in the winter.
58, that is hardcore.
 
  • Haha
Reactions: 1 user

Snowman7

Well-known member

Equipment
LX3310 535 loader, LX2980, RB2672, FDR1660
May 20, 2020
367
258
63
Boyne Falls, MI.
Getting the drain pipe set and covered with gravel. Put a couple inches next to the naked pipe on top of the cloth, flipped the cloth back and will fill to level. View attachment 104050
I didn’t want to have to try to clean gravel out of the yard (as if I had a nice lawn) so we’re shoveling the first yard and a half along the edge of the driveway. Put in a new flower bed for the missus, too. Darn if she didn’t plant two table lamps trying to grow some fancy lamp posts.
Oh, btw, the missus is actually encouraging me to get a dump trailer. I don’t think she likes shoveling #57 gravel.
Moved 10 more yards around and did some more earth moving yesterday. Used the box blade to level out some other areas of the yard as well. My son got about an hour of seat time with me while I was making piles around the yard.

I used the pressure washer to foam cannon the LX, wash all the dirt off, and grease all the zerks after the old stuff washed away. I'll have an additional sprinkler zone added in a few weeks and then I'll seed this area plus all the areas I leveled.

View attachment 104138 View attachment 104139 View attachment 104140
looks great
 

Fordtech86

Well-known member
Lifetime Member

Equipment
L3200
Aug 7, 2018
4,976
5,917
113
Pineville,LA
While we had the hoe on yesterday we dug up a stump in the front.

52C1348B-6ACC-4F64-A69A-593FFADD8ABA.jpeg

And he had to use his “tractor” to pull it out and drag it to the burn pile 😂

2B324E6A-52C2-46D0-8126-1FC1D86CA71D.jpeg
 
  • Like
  • Love
Reactions: 13 users

fried1765

Well-known member

Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Nov 14, 2019
7,843
5,066
113
Eastham, Ma
Sunday evening, decided I could use some more parking space since I still have a triaxle load of millings and half a load of no. 3's....so...lets do it!

Start:

View attachment 104160

diggy:

View attachment 104161

load out:

View attachment 104162

View attachment 104163

View attachment 104164

View attachment 104165

Needed another hour or so of daylight to finish. I should've started a bit earlier today. I will say that the mini makes this type of task so much easier/faster than with the tractor. If I had a skiddie, I'm betting it would take about 1/10 of the time as with the mini. But, the mini did just fine.

I'm betting that it will take much more time to bring loads of material in from my storage "yard". I'll get it finished up this week. It should add another 1000 sqft of parking space.
That grading bucket is the cat's axx !!!
 
  • Like
Reactions: 1 user

trial and error

Well-known member

Equipment
B7100dt manual trans. homemade FEL, 4 way hydraulic dozer blade
Feb 16, 2023
396
388
63
NY
"58, that is hardcore"

It's really not that bad