Could you expand on that a bit? What's a good RPM for doing FEL and BH work?
I have only one way to cross my property due to a ditch and its through a carport that is just an inch lower then the ROPS. I solved the memory problem by dropping a culvert and making a Kubota crossing. However the BX25 will live in the carport (for now) so maybe I'll have a chance to smash the ROPS some time.I had the tractor up off idle for faster cool-down, and so I rolled right up the ramp into the barn.
...and forgot (again) to lower the ROPS.
The big CRACK!! sound reminded me.
Cracked the door header on the barn. Fortunately the 2x4 that I cracked is the little thin one that the doors close against and not the big one above it that is the actual tie between the top plates.
Lesson learned? Jeepers, I hope so.
Oh no, sounds like something I'd do.It was actually yesterday. Put a nice 25 inch long gash in the side of the pool with the bucket. Lets just say there isn't much water left in the pool.
1.) Was beer involved? Either before or after?
Glad your ok! Put some weight on the 3pt hitch and keep the bucket below the hood unless your on level ground. I came really close to tipping mine once. I had the bucket full of gravel and raised up high on level ground without any weight on my 3pt, I started backing up and the front tire went up on a small chert rock and she started over, but I forced the bucket into float position and it came back down on all 4 tires and saved my little tractor. Can't say I saved my shorts though It was actually yesterday. Put a nice 25 inch long gash in the side of the pool with the bucket. Lets just say there isn't much water left in the pool.
A tractor isn't a tractor until it has a "beauty mark" or two but I try and stay away from it being GORGEOUS. A tail of woo adds to a conversation unless you run out of breath before it's completely told. Now it you could teach it to fetch, I am all ears.
