What did you do to or on your Kubota today?

[motorhead]

After working on my B3200 for the last 2 afternoons changing from the low amp Dynamo to the optional 40 amp alternator, I used my tractor to move a bunch of dirt today from my back yard to around the perimeter of my new driveway. Since the conversion, my tractor starts faster and cranks faster.

 

[2 Bears]

I mounted the LED strips i have been wiring up and tested them out.

 

[flyidaho]

I have been cutting into the hillside behind an outbuilding at home, whenever I need some fill, eventually I'll end up with enough room to expand the building if needed. I tag teamed the job using the new (bought used, 276 hours on it) U25s mini excavator and the L3301 tractor, an awesome combo. Then I used the 12' dump bed trailer to haul the dirt down to where I am cutting a mountain bike trail into the trees on my hilly property, where I used the tractor's FEL to move the dirt through the trail where needed. Fun stuff, and now with both these pieces of euqipment, interesting to decide which one to use for which task. Most of the trail building, gets roughed out first with the mini, then buffed out with the scraper blade on the tractor. Between these and my 30 ton boom truck with 110' of main boom and 44' of jib, SOMETHING is going to happen when I show up on the job.

 

[motorhead]

NICE dirt work! ^^^

 

[David Page]

Put the Grandsons in the trailer and gave them a ride. We left the tractor and snuck up to watch the baby fox playing in the cemetery ditch beside the culvert they hide in.

 

[rkidd]

I had just turned 804 hrs on my 2015 B2650, so yesterday I did the complete 800 hr service. Engine oil and filters, hst oil and filters, fuel and air filters, and front differential oil change. Ready for the new season if it ever drys out and warms up!!

 

[Mike9]

I put the dirt scoop on and I have to say it works as advertised. I distributed compost we've had cooking for the past few years and it's dark and rich. It made the job so much easier than it used to be.

 

[JeepinMaxx]

Picked up a CarryAll from TS in my Jeep (didn't really fit in my Wrangler) I should have just driven the 5 miles in my BX2660!

Now need to decide how to build it up! I searched and can't seem to find the Carry All build post...

 

[Saxman]

I put bags of red mulch on the 4 wheel trailer I built from an undercarriage for a 1938 Westinghouse engine drive welder. Got it hooked to my RTV 1120 for the wife to pull around the yard

Sent from my iPhone using Tapatalk

 

[North Idaho Wolfman]

Saxman,
I'm sorry but I gotta say it...You know your a redneck when your barbie corvette is up on blocks!

Got it hooked to my RTV 1120 for the wife to pull around the yard

 

[Saxman]

Saxman,

I'm sorry but I gotta say it...You know your a redneck when your barbie corvette is up on blocks!

Got me there. The grandkids run the wheels off that thing. Just waiting to go to a new home


Sent from my iPhone using Tapatalk

 

[jdriver]

I added a Fitrite hydraulics top and tilt kit and a new King Kutter 5' box blade

 

[Sharryn]

Took off the backhoe, installed the 3-point and plowed the garden with the middle buster. First time using the MB and I gotta say, once you get it adjusted correctly, that thing digs!

 

[Pat T]

Put the 54" mower deck on the BX2380 and mowed my lawn and my brother's, a little more than 4 acres total in around 2 hours. Man I love this thing!

Pat

 

[HD Orange]

Returned my Carry All (SKU#212821099) to Tractor Supply today. There is no way this Carry All will fit my Land Pride QH-05. E-mailed Land Pride and suggested they make a Carry All (Orange) for us Kubota owners. Wish me luck.

 

[Forvols]

Returned my Carry All (SKU#212821099) to Tractor Supply today. There is no way this Carry All will fit my Land Pride QH-05. E-mailed Land Pride and suggested they make a Carry All (Orange) for us Kubota owners. Wish me luck.

I don't know the difference of the qh05 land pride vs the qh15 land pride. But I just bought and built a carry all using the TSC carry all frame same SKU as you had. I did have to put 1x4 pressure treated furring strips on the back to give clearance for the QH15 lower arm and toplink hook up without cutting out slots for the lower/upper hook up. I am really pleased with the out come.

 

[HD Orange]

I don't know the difference of the qh05 land pride vs the qh15 land pride. But I just bought and built a carry all using the TSC carry all frame same SKU as you had. I did have to put 1x4 pressure treated furring strips on the back to give clearance for the QH15 lower arm and toplink hook up without cutting out slots for the lower/upper hook up. I am really pleased with the out come.

Forvols: Thanks for the reply. I think the QH-15 is a larger Quick Hitch. The TS Carry All looked just to big for the QH-05, nothing came close to fitting.

 

[deathtoblackberries]

The QH05 is small and light duty construction. I purchased one for my BX2380 and returned it. The arched construction along the top would not allow use with my Heavy Hitch weight bar the Kubota weights won't fit. I have the QH10 now, its a perfect fit for the tractor and everything has fit fine so far. WAY more heavy duty vs the QH05.

 

[HD Orange]

The QH05 is small and light duty construction. I purchased one for my BX2380 and returned it. The arched construction along the top would not allow use with my Heavy Hitch weight bar the Kubota weights won't fit. I have the QH10 now, its a perfect fit for the tractor and everything has fit fine so far. WAY more heavy duty vs the QH05.

Thanks for the information and pictures, looks like I should of bought the QH10. I will wait and see what Land Pride says. Great forum for us Newbies.

 

[eipo]

Ive been hauling the 2650 around for our son whos trying to make money to buy a car. Sometimes I have the loader on, sometimes not and I got tired of no decent, QUICK place to hook tiedowns. So I sent Ken at Bolt on Hooks an email to see if he had anything in the works for the 2650.

Long story short he gave me an idea of using a piece of angle iron and I had the perfect piece from a recent demo job....

2x3x1/4. All holes were done freehand...