Search results

Ok hot wired the solenoid works fine . Ignition switch . (Maybe) Wiring diagram power comes from ignition switch will get a new one & replace.

Changed the solenoid the orinal one was clicking on & off ( you could hear it ) The new one is doing the same thing " but not all the time used the tractor for a hr plus yesterday no Problum .Today used it 10 min. earlyer today no Problum went to use it agen "Problum" solenoid clicking on & off...

shuts right off. If you just unplug the fuel shutoff will it start or do you start it then unplug?

L3130 Starts right up runs min. Some times two will shut off let sit 30 sec. or so will start right up (no black smoke) Have not had Problem while operating. Have let it run at idle & 1/2 throttle not moving & will shut off. Dose not happen all the time.

Run a 72" behind my 1952 ferguson TO 20 there only 20HP can mowe in third gear 2nd if grass is high your 2650 will do fine

Put a plug in one on my 2018 GMC 1500 maybe 6 months now works fine. Is a band-aid yes butt the best price for a cam & lifter change kit is over a $1000 bucks. From all I have looked up the little pin in the lifters is "NOT" engaged when "NOT" in AFM mode so my simple mind thinks if the pin is...

THANKS

THANKS

How many gallons of hyd. oil do i need to drain just to do a Filter Change ? Will save & reuse (Exp. $$ UDT OIL ) THANKS

More time than money

i would bleed injector lines. messy job big pan under engine. i would start at the injector pump & then to the injectors. my 2 cents. And 13k is crazy. Worst case need to by a remand injector pump & injectors.

I know i have hearing loss. But i like to hear whats going on running my equipment. Just my 2 cents.

The tooth bar was a bent 60 inch from a skid steer. I bought for 20 bucks and modified for my 72 inch bucket. The ball hitch on pins turns around and locks in out-of-the-way backwards outer hooks and hook plate have quarter inch backers plates because that’s what I had.

Nice

Know what you mean wolf man my bucket 1/2" bow in the cutting edge form previous owner. need rig chain & poster power & fix

Plus one on each side of outer edge of the bucket

Been mowing with a 72" kingkutter side discharge for 20 yrs ( lots of maintenance over the yrs 4th set of hub assemblys & rebuilds. Countless weel bolts & bushinge did switch to solid tires yrs ago. Also Plating & welding of cracks. ) Use my ferguson TO-20 have never had it on my L3130. Use high...

When I got the tractor it had 950 hrs & no history / Filters were not O.E.M. so it had oils changed / I changed every thing at 1000hrs including front axel / used UDT2 / was changing eng. oil so I pulled a little oil from both sides 2 quarts or so did not look at it untill after I finished oil...

S Haved dumped oil into waste drum {dam} Was very light. Will run for a while & take a sample ?????

Bronze in the oil