Search results

Prime, paint and it will look great.

Be careful if you weld to the backside of the grill guard. I did that initially and had to cut off my work because there was not enough clearance for the hood to open. Also, paint does a reasonable job hiding a beginners' welds(as you can see).

Here's my go at it. I just cut the expanded metal into pieces and welded them separately onto the front of the grill guard. No issues with the articulation with this method.

FYI- there is a ton of information on flail mowers on the TBN website, including threads with over 700 pages. Not necessarily Kubota specific, but very informative.

In the back of your operators manual there will be a section on routine maintenance including a schedule as well as instructions regarding how to change your oil and hydraulic fluids, again, including the proper intervals. You don't need the workshop manual to see this information, although...

Looking for maximum size recommendations/experiences with flail mowers for the L6060(or other tractors in this series). I'll be cutting relatively level pasture, no ditch banks. I've seen suggestions ~6hp/foot of cutter. Wondering how well real world experience compares. Thanks in advance...

Removing and installing subframe is not terribly difficult and doesn't take too much time. Also, it's relatively easy to store and move around on a couple of inexpensive HF dollies. The snowblower is a pretty expensive attachment. Your dealer should make an effort to get you a copy of the...

here are some notes from your L4455A four-point hitch and subframe manual(page 9). "Important: detach the front loader boom before installing the subframe. The subframe and the front loader boom must never be installed simultaneously on the tractor. Remove the grill guard from the front of the...

I have an EA BB. Well made/high quality. Always have to check delivery times for EA products as for much of their stuff, it can take many weeks to get to you.

Just did this, so I'll give it a go. Just an FYI, my blower has the newer four-point hitch rather than the old male/female spade type connection between the subframe and the blower. First step, remove the hoses from the hose guides. Leave all the hydraulics connected. Raise the blower up, and...

Mine look to be attached with 8" carriage Bolts(x4)

I believe i have a similar connection type and it is "keyed". Look carefully and you will see it(photos below). Mark it so it's not such a pain to connect next time.