Search results

Trying to find the correct part number stamped on the Kubota wheel weights that will fit a B7100 Joe

HI I have a B7000 and a B7100 both tractors the headlamps were in bad shape the 7000 was good as far as the bulb holders go. I just went online and bought two led back up bulb lights Worrk good. The b7100 was a mess i purchased and few cheap painters brushes that fit into the light and some...

Wonder if that would be the right size for the B7100?? Just asking I have a B7000 that I was going to use the arms and verticals off of. Just swap them but the B7000 someone drilled out the top lift arms and put in cat o pins. And the B7100 lift arms still have the original holes with the...

For some reason when I ordered valves and guides and top engine seals for my B7000 In the box was an extra. One oil seals for a front wheel on a L185 DT well that is the number and tractor that comes up when I type it in Messicks Parts for Kubota. ?? It is a two piece seal. Have no use for it.

If there are any parts left from a three point hitch I need the two vertical lift arms; one solid and one adjustable Joe

Hi the B7000 was made for Asia No manuals have I found The B7100 manual is close but not perfect. It is for 3cyl yours is 2 cyl engine and the front drive assist is different in the gaskets and seals.

Hi Hope someone just has a set lying around collecting dust lol But the ones that came with this project are just chains which are adjustable to a point. Would like to put the right ones on the tractor One solid lift link and one adjustable lift link. Thank you for looking. Joe

Put new tires on the B7100 yesterday and the fellow told me one of the holes for the valve stem was rusted pretty bad on the inside. they sanded the rim on the inside and put some liquid rubber on the rust and around the valve stem before putting the tube in It looks like it will hold and...

Just saw parts side covers for sale on facebook marketplace Ohio and Pa.

Try Trakpartz in Netherlands??

Pushed some logs around with the blade today. Good part is the blade goes up and down and the front wheels turn in front assist engaged. Bad Part the pedal for the differential lock will not go down> Now I did not jump on it. The B7000 I have sometimes the wheels must turn to a specific...

Just got to try mine on a B7100 tines worn but runs smooth

interested in that dash usps shipping to 15074

Try this again here . Interested in the dash and switch's in the dash including the decomp knob and cable If you have the flasher lights on the fenders interested in them as well. Joe

If you still have the flasher lights and they are in good order those also.

does the dash have all the parts in it yet flasher switch rectifier headlamp switch cold start pull oil light wire indicater light for glow plugs and ignition starter switch

The shift knob removal wrap a bar rag around the knob Big channel locks and turn the knob Once it turns you can turn it again while pulling up on it and it slides off No threads

Thank you for the information I am going the easy way but will try that and see how it goes. But will have to do it in quarts just have the fridge freezer lol Found out it is a true B7100 even with the frame marked b7001. Parts got here Boot on trans drained and engine oil as well...

Ok problem solved Someone on epay has a copy of the Kubota B40C tiller. in the photo's it shows the speed 540 RPM Will be here by the 19 LOL from Buffalo to Pgh. Well at least it should have part numbers Thank everyone for helping me on this and the Cornhead grease Joe