Search results

A couple of questions: - When you're talking "RH gearbox", you're referring to the right hand side, looking towards the rear, yes? - There are four bolts on each side of the gearbox: 2 vertical holding the bracket (stay) to the deck, and 2 threaded into the gearbox itself. The 2 vertical...

Or just mount a 2" box receiver on your favorite 3ph implement, insert ball mount of your choice:

Well that sounds a whole lot better! Anyone know of a youtube video accurately showing this? The ones I found were useless. Thanks,

It looks like my belt is slipping on my ZD326, so it looks like it needs to be replaced. Never mind the $85 cost (from Messicks). The first step in replacing it is: Remove the deck! Anyone done this before? Any hints, tips and tricks? Anyone know the cost if the dealership did it? Thanks,

My only block heater is on my Ford PSD and it's either 1000 or 1500 watts IRC.

A couple years ago, I got two golf cart canopies for $50 each. I put one on my L4330 tractor and the other on my Kubota ZD326 ZTR. Except for some minor tree limb damge to the canopy on the ZTR, they've worked quite well. I made my frame with captured 3/8" nuts so I could install and dismount...

It did for me for the heater in my F-350. Of course, after moving, I have no idea where the timer is now. You have to make sure to have a timer rated for the full 15 amps. HD should have it.

I've had mine for about two years now. Mods include: - Tool carrier in the front of the bed - LED lights on the grill guard and on the roof - Replaced the Craptyle tires with ITP Blackwater Evolutions - Added rifle rack Pics:

What's your definition of cheap? They go for around +$175 around here (SC TN).

the biggest mistake with my L4330 that I made was following the "conventional" wisdom and the owner's manual for implement size. Hence, I got a 6' bushhog, 6' BB, 6' rake and a 6' disc. My rear tire outside to outside is +76 inches. My L4330 is a 40 hp tractor, yours is 49 hp (per TD). For...

Why bother? Get the real thing for $150: http://www.kubota.com/safety/RolloverProtectiveStructures.aspx

Check the 5 amp key stop fuse. It went out once on my tractor and it died until I replaced it. Don't know what caused it to blow but it hasn't since and it's been a couple years now. Good luck.

This is the way to do it.

I bought this one from Construction Attachments, which is owned by the brother of the owner of Everything Attachments. I bought the kit via National Implement since CA doesn't sell direct. I'm having it plumbed at the local tractor shop as we speak. I bought the option with the flat faced...

Where from and how much? thanks,

Bailey's Chief G Series, Part #220959, 10 gpm, 3 spool (with one float), about $190: http://www.baileyhydraulics.com/product/9586 A lot better deal and valve than what Surplus Center had. You need to buy the PB plug, about $20. Good luck!

I'm adding rear remotes to my L4330 and I want to use the Parker/Pioneer 4200 two way sleeve connectors, plus I need the mount/bulkhead to mount them to the rear of my tractor. Anyone know where I can get either one?

Craigslist "golf cart", someone will be selling used golf cart canopies. I got two of them for $50 each. Installed one on my L4330 and the other on my ZC326. Not the biggest and best but they certainly do the job. No pics of the ZD but you can see the tractor canopy here:

1. You need to remove the hitch off with any PTO implement installed. 2. Unscrew the rear pins, take the top pin out and then drive away; your driveshaft should separate. Use the Fel to lift up the auger, or try anyway. 3. Are those big rocks on the right? If so, you need to pay better...

Oops, that's exactly what I use!!! :eek: Guess I need to up it to a 4x4.....