Search results

I'm certain that you will get satisfaction with this issue. I hope that it is immediate! Of course, as we've seen throughout this thread, that will depend on your dealer. And on you, should your dealer be one of those who drags his feet. Best wishes for a speedy repair!

I'm hoping to get a discard soon! :D

So what happens when you 'crack' the injectors, one-by-one? is there one of them that doesn't cause the engine to stumble when it's cracked? I would be surprised if the answer is 'yes', but that seems to be a fundamental check. It sounds very much like there is a blockage. Your checks (filters...

<chuckle> Sorry, can't help. I'm thinking of changing my B6100D (4WD) to turf tires so did a quick check: Kubota B6100 Tires: (ag) (4WD) Front: 6-12 Rear: 7-16 Kubota B7200 Tires: (ag) (2WD) Front: 5.00-10 Rear: 8-16 (4WD) Front: 6-12 Rear: 8-16 Front tires are the "right" size, but...

Well, I suppose you won't be heading to Florida now, but when you do, give me a heads-up and I'll have my stick-welder running, and some sheet metal on hand. Now, to your dilemma of a new project: work with this design a few weeks to let improvements percolate, then create your Mod II and sell...

Spot on! Smart phones and tablets are actually more vulnerable than typical PCs as there are far fewer tools to protect, coupled with an astonishing naivety about the danger. Few of us stop to think of the things that we do with our phones that would be dangerous if we did them on our PCs...

I don't know the L4600, but I am very experienced with clutch issues in manual transmissions. Either lose the habit that I have of "riding the clutch", or stash beacoup bucks for new pressure plates and driven discs! I expect the L4600 manual has information on adjusting the clutch, and I'm...

Very impressive Photoshop work! A few minor discrepancies, but altogether pretty good stuff! (In candor, I must admit I didn't watch the entire vid, just stepped through it after the door came open -- I mean, has any living person ever seen a front-load that can be made to continue running when...

Interesting! Since our machines are so similar, I'm providing feedback on my B6100D fuel lines in hope that yours are the same. I've verified my thought that my fuel lines are 1/4" (0.254", painted). Sadly, the two choices Tiny-Tach offer for diesel fuel line pickups are 6mm and 1/4". You may...

No, sorry. I'm only responding cuz I can't think of why TinyTach whould care what the injector line size is. Wouldn't you run it off the crank? Or flywheel?

That does sound like a good deal. What is your use for the B2320 besides brush-hogging? Reason I ask is I've read (and learned via experience) that FEL work is far easier with an HST rather than a geared tranny. If you expect to do a lot of loader work, I urge you to give consideration to this...

Yay! Sweet machine!

That would be a good idea -- specs say it's a Cat 3. You prolly know our B6100s are Cat 1. 3PH and PTO would have to be modded.

Please forgive me for stating the obvious: the slope is too wide for a side-mounted rig to mow; the terrain is too rough for a side-mounted rig to properly mow -- but you would accept, I'm sure, skinned places and straggly patches, if you could safely mow it from the bank... I think you've given...

Have you gotten enough experience to finalize your design? I'm very curious to know how your back is standing up to all the implement changes.

Most any hardware store, particularly Ace * TrueValue, will have turnbuckles. If not that stout, they should be able to direct you to a source. I also find a variety at the big box stores.

Make up a checklist, include every item (e.g., lights; 3PH; etc.), verify functionality. Check every pin for clips.

Aw, go for it! Your JD would be a gas-guzzler but your L3560 "just sips" diesel. However, you might want to make a "Sunday visitor" outfit out of chain mail for your darlin' ... "just in case"...:eek:

Oh, man, that's beautiful! I want that for my B6100. (I hereby renounce my former statements that I had learned that I did not need rear remotes! :D )

I think he put it in stealth mode cuz he musta known I'd be on it like a chicken on a June bug! (Almost injured myself looking for the link!) :D