Search results

Sounds about right...I figured a mil on each side. I have the new pin but I don't trust any of my existing holes as my tractor is pretty old. The big question for me was about grease penetration. I wasn't sure if that was enough to let grease in there properly.

Hello everyone, I have a LA723 Front Loader that the prior owner did not treat right. I have to replace the top pivot pins (where the arms attach to the mounting bracket) AND rebuild the hole. I bought the replacement pins ( 7J267-58752 ) and I was planning on welding some DOM (Drawn Over...

Thanks everyone. I confirmed that the nipple is indeed fake. Didn't even consider that option.

Hello everyone, I just installed a block heater in my L3130. For some reason, my coolant reservoir does not have a line coming out of the bottom...just an empty nipple. The radiator has two big lines (one on top/one on bottom)...a small line from the radiator cap which goes to the reservoir...

Will do. Thanks!

Hello everyone, I went to check the tire pressure on the front tire of my L3130 and it won't read anything. A screwdrive pushed down the valve doesn't nothing either. I've never had to deal with this. Any pointers? I'm assuming that i have to change the valve core but I'm not sure what...

Sorry...I should have mentioned. I check the oil prior to changing it. It was filled perfectly. My main concern was because I didn't warm up the engine prior (couldn't run it in it's current state) but I wasn't sure if if that would cause THAT much of a discrepancy. I wan't sure if I should...

Hello everyone, I recently purchased a 2004 L3130 4x4 Manual with 2k hours. Im taking care of some odds and ends and drained the engine oil last night. Only 4L came out. Manual says 5.7L capacity. I made sure to do both plugs, tractor is pretty level..not perfect but close. I couldn't warm...

Just wanted to say thank you very much for your input and access to the resources. I'm gonna pull off both wheel hubs and do the seals/bearing. If anyone had any other preventative maintenance they would recommend I would be all ears. I will be doing everything on the normal schedule but I'm...

Hello everyone, Well...after 5 years of saving and over a year of looking I just picked up an early model L3130...literally got it a home less than an hour ago. The guy said it was a 2000...looks like they didn't start making them until 2003 so who knows. 4x4, 8 speed, LA723 Loader, BH90...