Search results

Worst day of snow removal in the 10 years I have owned this Kubota We have had about 4-5 feet since November, that was pretty easy until last week when the temps dipped below zero.. The snow removal was easy just cold.. Yesterday we shifted hard with a Bi-Polar Mother Nature, last Wed was -5°f...

This was my solution.. As you can see it was made 7 years ago and everything still works exactly as designed

Light fluffy snow in Dec is practice for the wet heavy stuff later in the season LOL I only use my BackBlade when we have breakup on the road, that 3" or so of base layer that lets loose usually the last week of Feb or the first week of Mar It becomes frustrating deciding to run the blower and...

The lever won't stay in the locked position, so the wheel moves pretty easy, It looks like a simple friction mechanism. Going to try and get to it in the morning

You are speaking a foreign language, :LOL::ROFLMAO::p what are these strange things you speak of, "Spray with a little water" "Hose it off" We have had over 2 feet of snow since last Thursday when the hose blew, Tis a Wee bit Chilly to be running a hose :cool:

So after blowing a Hydraulic line and misting the entire cab area with a fine spray of slick oil I have a small problem My Tilt Wheel Adjustment lever is slipping So I took it apart and found the bolts that look to tighten it, I tightened those down but it is still slipping My next idea is...

Okay., after talking with Wolfman last night on the phone, I decided to take it all apart and start from step one again.. This time I tracked the color codes as best I could I cleaned up both connectors made sure they were functioning as best I could Put it all back together switching the two...

I am going to try it since both you guys have suggested it, I have tried everything except new Connectors now I am not sure if it is even possible but at this point I am trying everything :) Wooohoooo nothing like fixing stuff in the cold

I am going to try reversing them tomorrow morning, I swore I had it right but maybe I screwed up at the Loader Block that is at least physically possible Crossing fingers again for the morning :)

No Brown's took the old connectors to make the new lines

It physically cant be swapped lines... It makes no sense especially now that I can get the bucket to move by messing with the 3pt and the bucket control Wouldn't that mean the connectors are allowing flow ??? Totally stumped neighbor

The hose blew because it wore through The loader function has been like this for over a decade, that is why none of this makes sense..

It is physically impossible to reverse the hoses because of length, plus one has a male connection and the other is female

so freaking weird ok so usually if the 3pt is in the full up position the FEL doesn't barely function I was running the 3pt full up and sure enough the bucket lift function worked and the bucket came off the ground but I could lower it until I dropped the 3pt again This really makes zero...

okay on the bottom These two hoses were replaced the one to the right is the one that actually blew That hose goes here on the Loader Controls up top I also replaced the hose to the left as it had a wear spot and I figured I might as well do it while I was at it It had a Quick connect...

Blocked Circuit??? Can you explain please

Unplugged both Quick Connects and re-attached, was the first thing I thought of too Doubled checked the orientation of the block screw but will rotate it back and forth one time anyway, read that on my Loader instructions just like you posted.. Going to try bleeding the lines next, I went and...

I don't get it.. I blew the IN hose for my FEL of Thursday.. I noted that one of the other main hoses was worn too I had both hoses replicated at a very reliable shop This morning I carefully and methodically replaced both hoses, they CANNOT be switched mistakenly I changed the filter and...

I just bought one today I will let ya know :)

Yeah I remember it all to well, our Payroll software didn't get the Patch and ran back to the 1800's Spent the next two days trying to get it corrected and our staff payed Being as it was a Nightclub I was not happy to be there trying to get it corrected after one of the best NY eve nights in...