Search results

ACP, when you retorqued the bolts what value did you torque them to? was it the same value given in the workshop man. as the final "ft. lbs"? if you did that correctly and did not over tighten them by a significant it is unlikely that any trouble will result. A gross over torquing would result...

Given your statements about old fuel, newer offroad fuel with a known dirt /particulate issue and unknown filter change all points to a fuel <<problem!!!>> Begin with a drain/ flush of the tank. then change filter, Bleed all connections from the tank to the IP then on to the injectors...

<<serviced 15 hrs ago, oil is full, gas full>> Correct fuel? Kytim

The 5100, 6100, 7100 boxes, ive been told are the same. so going on that info I just rebuilt the box on my 7100. now the upper and lower bearing and race assembly, sold as a mated pair, are replaceable and should be in any box rebuild due to the inexpensive nature in regard to the cost of the...

I'll tell ya what i'll do. since we are both a couple of nice guys and good ol' boys i'll come over tomorrow and load up **all** that "junk" takeing up space in yer barn and you won't be bothered by that orange stuff anymore. But seriously, I like the new shoes on the 5100e. i've been looking...

do you mean tried this very one or any of the many on the market, or homemade ones? if the latter I for one like them pretty much any design. i think it makes a bar more functional. kytim

unfortunate world we live in today! kytim

have you checked the suction line filter, fluid level and quality for water? Iffen it were me i'd start there. kytim

While looking at your pic's again, I noticed something. I may just be me but, I really don't think you should have welded the rings onto a certified ROPS. The heat could cause a failure in a roll. Look, I'm not wanting to start an argument just stating the observation about an engineered piece...

+1 "Tip: After years of being a heavy equipment operator I have learned this. A dirty truck will get stopped over a clean truck every time. If your truck/trailer is nasty and looks like rolling scrap metal you are giving them a excuse to pull you over. Correct lighting and being clean will...

If your sure the trans doesnt have a slip clutch it is a simple matter to add one if you need it. several different styles are made, different splines, pins etc. or you could even build the pto shaft that would be the correct mating stub shafts to incorporate the clutch. kytim

Is this tractor Porn? Kytim

Condition, condition, condition, location, included parts. pics?? not to be smart but see how little we know about that particular loaders possible value? kytim

I need to complete the same job on my 2wd 6000. It has several small randomly placed holes that need to be plug welded. I just use a jack and block up the front of the tractor safely. kytim

In reality, the reason for this dual wheel concept on a small tractor is to score a good deal higher on the agricultural coolness scale. Kytim

My only comment is be sure to instruct the youngster on proper use. a accident here locally took the life of a 11-12 yr old because she was sliding it in gravel. she took off got up to full speed on gravel down a small hill, crank the handle to slide it. A flip of the machine took her life. if...

I agree with Phil the Bulldog, go see your dealer. be specific about operation and resultant work. kytim

well thats different, my floor would of needed mopping with all the warn water that suddenly appeared! kytim

I have a KK 48" and have been very happy with it since I bought it. heavy but does a nice job plus it is gear driven, at least the model I bought is. Don't forget to check the gearbox levels when setting one up. I've got 3 KK brand implements and have been happy with each one. I wouldn't back up...

Just return it with a big red bow on it! he'll never notice. Just kiddin' around, we're glad you stopped in to join us. someone will surely be able to help. Just make sure to provide the info asked, try whats suggested, and tell us what worked. that way we may be able to help someone else too...