Search results

The barn has a 12" x 20" room partitioned off in it that is insulated,sheetrocked and has a small wall mounted thermostatically controlled propane heater , It has cabinets and counter space and my honey has all her arts & crafts stuff out there. Bribery will get you many things:rolleyes:

Actually we do say hello we just do not really socialize with each other,Actually I plow their drive when it snows. I do not mind using my equiptment to help my neighbor out but my motto is: Never a lender or a borrower be, Meaning If my equipment is being used then I am the one using it. That...

Nice clean looking setup, I like the remote joystick, Is it cable operated? Those are some mean looking tires, They must really pull well!

I agree ,Choosing the right chipper for ones specific needs can be confusing and expensive My chipper progression, Started with a 6Hp Craftsman Moved on to a 10HP OHV Tomahawk Both worked OK but I always needed just a litter more power and wanted something that would self feed...

You indicated that the main filter was changed a month ago and that your problem has developed within this last week, Is it possible you have used the wrong filter?

Doing some routine maintenance on my B5100e 2 cyl z500 engine and was wondering if the injectors on this engine could be disassembled and cleaned without any special tools, The engine runs strong but it does puff some light bluish/white smoke at startup so I am suspecting the original injectors...

Here is another site that list parts including pistons & rings for your KE70 http://www.engnetglobal.com/c/c.aspx/PAR017/productdetail/PAR017_mitsubishi

Here is a supplier with some Satoh Mitsubishi parts including rings, Maybe your model is shown, Prices here seem reasonable. http://www.stevenstractor.com/parts/compacts/mitsubishi-satoh/engine-parts.html Here is a Yahoo group that is dedicated to Mitsubishi Satoh Tractors. They may have...

I believe the 2 standard size holes for valve stems are 0.453" and 0.625", There is also a 0.327" size which is less common. There are they common automotive type that are made of rubber and pull into place from the inside of the rim and then there are screw in types that are all metal and have...

There are literally millions of cars and trucks that have the temp sending unit threaded into the water jacket in side of the block, This is especially true of many of the inline 4 & 6 cyl machines, Considering that is more likely closer to the combustion chamber/process that is where the most...

My Rifle The Creed of a United States Marine By Major General W.H Rupertus USMC This is my rifle. There are many like it, but this one is mine. My rifle is my best friend. It is my life. I must...

Adding some weight to the rear or some ballast to the rear tires makes a big difference on the smaller garden tractors, Also make sure the deck anti scalp wheels are set right and that the deck is not hanging too low, You could also switch the rear tires to a more agressive tread pattern but you...

I needed 3 new blade adaptors for my mower deck and Kubota wanted $79.00 each so I decided that I would fabricate my own, Personally I think the ones I have fabricated are better than the stock ones, I have included a few pics below, The old rusty blade adapter was made from 1/8" steel and as...

Is the pin hole leak from external damage or is the radiator corroded away, If from external damage I would clean the area around the leak and repair it with solder and pressure test, I would probably do a solder repair on it even if the pin hole was from corrosion then pressure test it to see...

Eddie Jr... I was going to take pics of it but somehow never got around to it, What I did was cut the top and bottom of the tank off and then cut it in half lengthwise, I welded and bolted it to an existing plow setup on an old Sears Suburban that the blade was beatup on, It worked very well for...

Hi Big T, Not sure about your B7100d but on my B5100 and B7500 there is upward lift on the 3 point and downward movement is by gravity only, My B7500 does have a knob under the seat that allows you to control the speed at which the 3 point drops and it can be set so that it will hold it up...

This may sound silly but have you made sure that one of the pto's is not in the engaged psoition, I know I was going crazy one day trying to figure out why my tractor would not crank over until I realized that my pto was engaged, As for the fuse, try tracing the wire to see where it goes, it is...

Nice roller! I have used old propane tanks for a number of projects, They are cheap and very durable, I have a 20 lb and a 30 lb cylinder set up as portable air tanks, I cut a 100 lb cylinder in half lengthwise once to make a plow blade , I never thought about making a roller out of one, Well I...

I spend way too much time in the bathroom since I got my laptop. :rolleyes:

Is it actually overheating as in the engine coolant temperature getting above the normal temperature or is it more that there is excessive pressure in the cooling system. Many times what is percieved as overheating is actually the cooling system being pressurized caused by compression from one...