Search results

Have you tried contacting your Kubota dealer to see if they offer something?

Wow, After seeing the photos it is obvious there is no vent off the valve cover, No wonder there was some confusion in the discussion, Although I am not familiar with all the Kubota models the injector pump seems like kind of a unique location for a crankcase vent, At any rate I am glad it was...

Knew it was a 59 because of the hood badging, could not exactly make out the number(F100 or F250) or see the number of bolts on the wheels, Great trucks though, They run forever

Nice toothbar especially for under $100.00, I like the 1959 Ford F100 in the pic too

Glad you figured it out... Doesn't sound like it has anything to do with your crancase vent, Not quite sure how your injector pump could be pressurizing your crankcase though unless your are pushing fuel into it thru a leaking seal, Might want to check to make sure there is no fuel in your oil.

Yes, The CCV is like the PCV system in a car except there is no valve and it does not connect to a vacuum line on the intake, Instead it just vents down below the tractor. Check the oil level in your engine and if it is higher than normal then check the level of your transmission fluid to make...

The crankase vent should be a tube coming from the top of the valve cover which is the highest point in the non pressurized oil system of the engine, It allows pressure generated from engine heat,normal combustion blowby from the rings and valve guides to vent. What you are describing does not...

Sorry, Misunderstood what you wanted, My B7500 has a hard fiberglass canopy that is supported by a frame that bolts to the ROPS, Looks like it was factory installed. You can just see it in this pic, It is the tractor in the rear left side, I have lights mounted on it and a rear view mirror and...

You can get a lawn sweeper, Can be used for leaves as well as grass clippings,Hooks to drawbar. This one is a 50" wide model from Northern

These guys are about 5 miles from me, I have not used them but the have been in business for quite a while. http://www.fremar.com/index.html

I have to agree with Vic on the Kubota ownership rules, However what is done is done and now you need to put a clutch in that bad boy, Time to call up your friend who burnt it out and tell him to get over there and lend a hand putting that new clutch in, And then let him know its for sale and...

Nice little mower,I have one on my B5100E, Does the B6100 have a reverse rotation PTO, If so did you have to change the blades, The owners manual for my K348-7/K348-6 has a notation that the K348-6 is for the B6000 series machines. Val

If you took the U joint to NAPA I am sure they could match it up for you,

On both my machines(B7500HSD & B5100E) I can put the lever in the up position and let go of it and the 3 point will raise all the way up and the lever will rebound to the neutral position when it has hit top of lift, Of course I can also manually use the lever to lift and stop at a desired...

Here a link to the specs for the B6200D showing the different tire sizes. http://www.orangetractortalks.com/specsmodel/?id=20#Tire

It always nice when it turns out to be a simple problem with an easy(and inexpensive) fix.

More discussions on chippers here: http://www.orangetractortalks.com/forums/showthread.php?t=4442&highlight=fitchburg+chipper Including my reasons for buying a self powered chipper over a PTO powered chipper. I have to agree with Eric,Renting one might be economicaly more feasible than...

Not familiar with the T1760 but if it has a drive belt is it possible that it is not tight enough, If the belt is tight is is possible you have sheared a shaft key or a shear pin. Do the blades move easily by hand with no resistance when they are engaged *****always being extremely careful that...

I just did a quick search of"Kubota L175 Water Pump and got a buch of results showing a water pump for the L175, You could always just look and see if there is a pump or circulator on the front of the engine. Here are a few examples: http://bestfarmparts.com/product_info.php?products_id=388...

I believe several of the members here work at Kubota Dealerships so they should be able to help you out if you now what you need, You can also get an idea on what the cost from the below site. http://www.tractorsmart.com/PartsBooksKubota/KubotaPriceList.asp There are also several tractor junk...