Search results

If your top link is not long enough you should be able to find a longer one at Tractor Supply or Agri Supply or other similar outlet

should be a number somewhere on the old belt, Most times one of the numbers is the length, If not then you can measure the old belt if it is not too far gone, If that is the case then take a piece of 3/8" rope and wind it around the pulleys according to the belt diagram and mark where they...

Small diesels are used for power generation and water/fluid pumps in many marine applications, Their fuel effeciency is much better than that of a comparable size/horsepower gasoline engine. While adapting one to an I/O outdrive would not be impossible and the reverse rotation could be overcome...

LOL...I quit smoking quite a few years ago and was able to save enough money to buy my tractor.

I am not a fan of facebook ,Have no use for it,twitter either,never had a myspace page never needed one. I am a member of this group and a few other topic oriented groups, I personally like it this way because I can come here and read when I want and go about my day, I use email and sell some...

Makes one wonder whay these switches are used, When you take into consideration that automobiles do not have any type of switch that shuts down the engine when there is no operator prescence and then look at the ratio of automobiles(includes cars,trucks,suvs,motorcycles,etc) versus the...

Personally I do not ascribe to the blocking the clutch pdeal, This compresses the springs in a spring type pressure plate and puts the spring steel arms in a diaphragm type pressure plate in a constant flexed/tensed position, I personally believe that this can result in premature pressure plate...

I think prices are very subjective and vary widely from different locations of the country/world, You do not indicate if your B6000 is 2wd or 4wd which is an important factor to many potential purchasers, Just as an example I purchased a late 70's B5100E a few months ago, The tractor runs great...

Northern has 20 x 8 x 10 Turfs, The listing indicates they have an outside diameter of 20.5 inches. http://www.northerntool.com/shop/tools/product_200331335_200331335?cm_ite=13455&cm_pla=Tires + Wheels>Turf Tires + Wheels&cm_cat=Nextag&cm_ven=Aggregates[/URL]

Kubota sells a sweeper for some of its models, From the pics it appears to be hydraulically driven

Here is a link with some info, May help identify your tractors engine. http://en.yenibiz.com/achat/produit_details_prod_1196.html

If your current rim is not to bad and only the valve stem hole is rusted would it be possible to enlarge the hole thereby removing the rusted material and use a valve stem bushing. Gemplers sells one as can be seen in the below link but you may also be able to get something at your local...

Gemplers carries a selection of wheels which may fit your particular application. Here is the direct link to the ag wheels page http://www.gemplers.com/shop/ag-wheel

The years really start to fly bye as we get older, I remember when I was a kid a day especially the long days in June seemed to last forever, Now they fly by before you even realize they are gone. Hence a very good reason to treat yourselves to lifes pleasures while you can still enjoy them:D...

Hmmm...78Vette a ford employee:eek:

My B5100E is blue and my B7500 HSD is Grey, I think Kubota changed colors over the years, The orange on my two machines are actually different shades also and it is not just a difference from fading from sunlight exposure as you can see a difference even on areas like under the hood etc.

I think they all lower by gravity/weight

I understand what you are describing and to me it looks like a lug that would serve to keep a hose clamp positioned on the yellow plastic cover where it slides over the black plastic sleeve, What is inside the yellows bellows besides a universal joint on the shaft, The U joint has its own grease...

That appears to be a locating lug for a clamp

If they have plastic caps on the grease zerts you can take them off to grease them then put the caps back on after you are done